479
edits
Changes
Mobile data connection troubleshooting (view source)
Revision as of 22:30, 19 May 2020
, 22:30, 19 May 2020→Debugging process
'''Note:''' OK means that the module has registered in UMTS/LTE network
'''Note:''' OK means that the module has registered in UMTS/LTE network
----
----
* Use command '''AT+QICSGP''' to configure APN, user name, password and auth type by AT+QICSGP
* Use command '''AT+QICSGP''' to configure APN, user name, password and auth type:
AT+QICSGP=<contextID>[,<context_type>,<APN>[,<username>,<password>)[,<authentication>]]]
AT+QICSGP=<contextID>[,<context_type>,<APN>[,<username>,<password>)[,<authentication>]]]
<context type> The protocol type (1 – IPV4; 2 – IPv6).
<context type> The protocol type (1 – IPV4; 2 – IPv6).
<authentication> The authentication methods (0 – NONE; 1 – PAP; 2 – CHAP; 3-PAP or CHAP)
<authentication> The authentication methods (0 – NONE; 1 – PAP; 2 – CHAP; 3-PAP or CHAP)
Example: use '''AT+QICSGP=1,1,"APN_Name","","",1'''
...
...
AT+QICSGP=1,1"bangapro","","",1
AT+QICSGP=1,1"bangapro","","",1
