Line 47: |
Line 47: |
| ... | | ... |
| | | |
− | '''Note:''' Reboot the module if it fails to identify SIM | + | '''Note:''' reboot the module if it fails to identify SIM |
| ---- | | ---- |
| * Use command '''AT+CREG''' to check GSM connection: | | * Use command '''AT+CREG''' to check GSM connection: |
Line 67: |
Line 67: |
| '''Note:''' OK means that the module has registered in UMTS/LTE network | | '''Note:''' OK means that the module has registered in UMTS/LTE network |
| ---- | | ---- |
− | * Configure APN, user name, password and auth type by AT+QICSGP | + | * Use command '''AT+QICSGP''' to configure APN, user name, password and auth type by AT+QICSGP |
− | ...
| |
| AT+QICSGP=<contextID>[,<context_type>,<APN>[,<username>,<password>)[,<authentication>]]] | | AT+QICSGP=<contextID>[,<context_type>,<APN>[,<username>,<password>)[,<authentication>]]] |
| <context type> The protocol type (1 – IPV4; 2 – IPv6). | | <context type> The protocol type (1 – IPV4; 2 – IPv6). |
| <context id> The range is 1-16. | | <context id> The range is 1-16. |
− | <authentication> The authentication methods (0 – NONE; 1 – PAP; 2 – CHAP; 3-PAP or CHAP). | + | <authentication> The authentication methods (0 – NONE; 1 – PAP; 2 – CHAP; 3-PAP or CHAP) |
− | Example: AT+QICSGP=1,1,"APN_Name","","",1 | + | |
| + | Example: use AT+QICSGP=1,1,"APN_Name","","",1 |
| + | ... |
| + | AT+QICSGP=1,1"bangapro","","",1 |
| + | OK |
| ... | | ... |
| ---- | | ---- |