Changes

The command above will change the router's DHCP Server's current Start address, Address limit and Lease time values '''''(highlighted in orange)''''' to custom values provided in the '''"values"''' section of the command '''''(highlighted in green)'''''.

The command above will change the router's DHCP Server's current Start address, Address limit and Lease time values '''''(highlighted in orange)''''' to custom values provided in the '''"values"''' section of the command '''''(highlighted in green)'''''.

[[File:JSON 012.jpg|border|class=tlt-border|520px]]

[[File:Networking rutxxx configuration examples dhcp server v1.jpg|border|class=tlt-border|520px]]

[[File:JSON 014.jpg|border|class=tlt-border|520px]]<br>

[[File:Networking rutxxx configuration examples dhcp server v2.jpg|border|class=tlt-border|520px]]<br>

'''Note: Remember always to use the commands in the order (set, commit, luci-reload)'''

'''Note: Remember always to use the commands in the order (set, commit, luci-reload)'''

* '''batch''' - returns the router's Batch number

* '''batch''' - returns the router's Batch number

* '''hwver''' - returns the router's Hardware Revision number

* '''hwver''' - returns the router's Hardware Revision number

* '''simpin''' - returns the router's SIM card's PIN (as it is specified in the '''[[{{{name}}}_Mobile]]''' section)

* '''simpin''' - returns the router's SIM card's PIN (as it is specified in the '''[[https://wiki.teltonika-networks.com/view/RUT955_Mobile'|Mobile]]''' section)

* '''blver''' - returns the router's Bootloader version

* '''blver''' - returns the router's Bootloader version

<br><br><br>

<br><br><br>

The command used is ''uci set'' (highlighted in red). The config file name is '''simcard''', section '''sim1''', options '''mtu''' and '''service''' (configs, sections and options highlighted in orange). The response shown above is a positive response, but don't forget to execute ''uci commit'' and ''luci-reload'' afterwards or else your changes will not take effect.

The command used is ''uci set'' (highlighted in red). The config file name is '''simcard''', section '''sim1''', options '''mtu''' and '''service''' (configs, sections and options highlighted in orange). The response shown above is a positive response, but don't forget to execute ''uci commit'' and ''luci-reload'' afterwards or else your changes will not take effect.

[[Category:{{{name}}} Configuration Examples]]

[[Category: RutOS Configuration Examples]]