Changes

===Configuration===

===Configuration===

----

----

TAP is used for creating a network bridge between two Ethernet segments in different locations. For this example we will be creating a TAP (bridged) type connection that uses the UDP protocol for data transfer and TLS for Authentication. We will be using two RUT routers: '''RUT1''' ('''Server'''; LAN IP: '''192.168.1.1'''; WAN (Public static) IP: '''193.186.223.42''') and '''RUT2''' ('''Client'''; LAN IP: '''192.168.1.2'''); the two routers will be connected via OpenVPN.

TAP is used for creating a network bridge between Ethernet segments in different locations. For this example we will be creating a TAP (bridged) type connection that uses the UDP protocol for data transfer and TLS for Authentication. We will be using two RUT routers: '''RUT1''' ('''Server'''; LAN IP: '''192.168.1.1'''; WAN (Public static) IP: '''193.186.223.42''') and '''RUT2''' ('''Client'''; LAN IP: '''192.168.1.2'''); the two routers will be connected via OpenVPN.

[[File:Openvpn tap example.png]]

[[File:Openvpn tap example.png]]

To sum up, just make sure the Server and the Clients use the same parameters (same authentication, same port, same protocol, etc.). The most important aspect of a TAP configuration is that it just bridges two network segments and '''doesn't create a different virtual network'''. Therefore, as in the example provided above, the routers have to be in the '''same subnet''' (192.168.1.0 in this case). While making sure of that, don't forget that the routers can't have the same IP address, just the same subnet (for example, if both routers have the LAN IP 192.168.1.1, the connection won't work; if one has, for example, 192.168.1.1 and the other 192.168.1.100, then the connection will work).

To sum up, just make sure the Server and the Clients use the same parameters (same authentication, same port, same protocol, etc.). Since the OpenVPN interface that comes up is bridged with the LAN interface, make sure the routers are in the '''same subnet''' (192.168.1.0 in this case). While making sure of that, don't forget that the routers can't have the same IP address, just the same subnet (for example, if both routers have the LAN IP 192.168.1.1, the connection won't work; if one has, for example, 192.168.1.1 and the other 192.168.1.100, then the connection will work).

For this example we used TLS Authentication. If you want to use a different Authentication method, refer to the relevant section of this article. The authentication configuration will not be different because of the chosen OpenVPN type (TUN or TAP).

For this example we used TLS Authentication. If you want to use a different Authentication method, refer to the relevant section of this article. The authentication configuration will not be different because of the chosen OpenVPN type (TUN or TAP).