Changes

no edit summary
Line 160: Line 160:  
# L'appareil ne doit pas produire de brouillage;
 
# L'appareil ne doit pas produire de brouillage;
 
# L'appareil doit accepter tout brouillage radioélectrique subi, mźme si le brouillage est.
 
# L'appareil doit accepter tout brouillage radioélectrique subi, mźme si le brouillage est.
 +
 +
'''Hazardous (Classified) Locations'''
 +
 +
This device is classified to UL 121201 Ed. 9-2017 and CSA C22.2 No. 213-17 (R2022) standards and are suitable for use in Class 1, Division 2,
 +
Groups A, B, C and D, T4 and Class I, Zone 2, Group IIC, T4 classified Hazardous Locations.
 +
 +
Ambient temperature range: -40°C ≤ Ta ≤ +75°C.
 +
 +
Ingress Protection rating: IP30.
 +
 +
All input and output wiring must follow Class I, Division 2 and Class I, Zone 2 wiring methods (NEC Section 501.10(B) or CEC 18-152) and follow the authority
 +
having jurisdiction.
 +
 +
The following warnings and instructions apply:
 +
 +
'''WARNING''' – EXPLOSION HAZARD. DO NOT CONNECT OR DISCONNECT WHEN ENERGIZED.
 +
 +
Cet appareil est classé selon UL 121201 Ed. 9-2017 et CSA C22.2 No. 213-17 (R2022) et conviennent pour une utilisation en Classe 1, Division 2,
 +
Groupes A, B, C et D, T4 et Classe I, Zone 2, Groupe IIC, T4 emplacements classés dangereux.
 +
 +
Plage de température ambiante: -40°C ≤ Ta ≤ +75°C.
 +
 +
Indice de protection contre la pénétration: IP30.
 +
 +
Tout le câblage d'entrée et de sortie doit suivre les méthodes de câblage de Classe I, Division 2 et de Classe I, Zone 2 (NEC Section 501.10(B) ou CEC 18-152)
 +
et suivre l'autorité compétente.
 +
 +
Les avertissements et instructions suivants s'appliquent:
 +
 +
'''AVERTISSEMENT''' – RISQUE D’EXPLOSION. NE PAS BRANCHER NI DÉBRANCHER SOUS TENSION.
 +
 +
'''NCC Warning Statement'''
 +
 +
* Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to a approved low power radio-frequency devices. The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications is operated in compliance with the Telecommunications Management Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices.
 +
 +
* To keep right of privacy, use appropriately.
 +
 +
* Use with caution to minimize electromagnetic impacts.
 +
 +
* Standard MPE: 0.45 mW/cm<sup>2</sup>, actual value measured on product: 0.05 mW/cm<sup>2</sup>. It is advised to keep the antenna at least 20 cm away from human body when using the device.
 +
 +
* Warning: Operation of this equipment in a residential environment could cause radio interference.
 +
    
Detailed compliance information is available at the following internet address: [https://wiki.teltonika-networks.com/view/Certificates wiki.teltonika-networks.com/view/Certificates].
 
Detailed compliance information is available at the following internet address: [https://wiki.teltonika-networks.com/view/Certificates wiki.teltonika-networks.com/view/Certificates].
Line 196: Line 239:  
|20 dBm
 
|20 dBm
 
|}
 
|}
 +
 +
'''FCC Radiation Exposure Statement:'''
 +
 +
This device complies with the relevant FCC RF radiation exposure limit set forth for an uncontrolled environment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter and must be installed to provide a separation distance of at least 20 cm from all persons.
 +
 +
'''ISED Canada Radiation Exposure Statement:'''
 +
 +
This equipment complies with IC RSS‐102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.
 +
 +
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR‐102 établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.
    
=== Operating conditions ===
 
=== Operating conditions ===
Line 276: Line 329:  
What is the main difference between RUT956 and RUT955?
 
What is the main difference between RUT956 and RUT955?
   −
RUT956 has CPU Mediatek MIPS 24Kc 580 MHz
+
RUT956 has CPU Mediatek MIPS 24KEc 580 MHz
 
RUT955 has CPU Atheros Wasp, MIPS 74Kc, 550 MHz
 
RUT955 has CPU Atheros Wasp, MIPS 74Kc, 550 MHz
   Line 309: Line 362:  
</table>
 
</table>
   −
== Configure your computer (Windows) ==
+
{{Template: Configure_your_computer_LAN_Windows
 +
<!------------------------DEVICE----------------------->
 +
| name        = RUT956
 +
}}
 +
 
   −
<br>
+
{{Template: Configure_your_computer_WiFi_Windows
<table>
+
<!------------------------DEVICE----------------------->
    <tr>
+
| name        = RUT956
        <td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; margin: 10px; padding-bottom: 25px;">1. Ensure the Wireless network connection is Enabled. Go to Start — Control Panel — Network and Internet — Network and Sharing Center. Click on the '''Change adapter settings''' in the left panel, then right-click on Wireless Network Adapter, and select Enable.</td>
+
}}
        <td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; width: 680px; margin: 10px; padding-bottom: 25px;">[[File:Configure_your_computer_step_1.png|right|600 px]]</td>
  −
    </tr>
  −
    <tr>
  −
        <td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-top: 25px;">2. Check if IP and DNS are obtained automatically. Right-click on Wireless Network Adapter and select Properties. Then select '''Internet Protocol Version 4''' and click Properties.
  −
<br>3. If not selected, check to '''obtain an IP address''' and '''obtain DNS server address automatically'''. Click OK.</td>
  −
        <td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-bottom: 25px; padding-top: 25px;">[[File:Configure_your_computer_step_2.png|right|500 px]]</td>
  −
    </tr>
  −
    <tr style="border: 1px solid #E8E8E8;">
  −
        <td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-top: 25px;">4. Connect to a wireless network by right-clicking on Wireless Network Adapter and selecting Connect.</td>
  −
        <td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-bottom: 25px; ; padding-top: 25px;">[[File:Configure_your_computer_step_3.png|right|600 px]]</td>
  −
    </tr>
  −
    <tr style="border: 1px solid #E8E8E8;">
  −
        <td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-top: 25px;">5. Choose the wireless network RUT956 **** from the list and click Connect. Enter the WiFi password located on the device's label.</td>
  −
        <td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-bottom: 25px; ; padding-top: 25px;">[[File:Configure_your_computer_step_4.png|right|400 px]]</td>
  −
    </tr>
  −
</table>
      
== Login to device ==
 
== Login to device ==

Navigation menu