Changes

6,833 bytes removed ,  13:02, 13 October 2023
Line 1: Line 1: −
This Wiki page contains the online version of the '''Quick Start Guide (QSG)''' for the '''RUTM50 Router.''' Here you will find an overview of the various components on the front and back of a RUTM50 device, hardware installation instructions, first login information, device specifications, and general safety information. It is highly recommended to acquaint yourself with the Quick Start Guide before using the device. You can also locate a printed version of the Quick Start Guide in the packaging box of your device.
+
This Wiki page contains the online version of the '''Quick Start Guide (QSG)''' for the '''RUTM50 5G Router'''. Here you will find an overview of the various components on the front and back of a RUTM50 device, hardware installation instructions, first login information, device specifications, and general safety information. It is highly recommended to acquaint yourself with the Quick Start Guide before using the device. You can also locate a printed version of the Quick Start Guide in the packaging box of your device.
    
<table>
 
<table>
Line 48: Line 48:  
RUTM50 router must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.
 
RUTM50 router must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.
    +
'''FCC'''
   −
'''CE Declaration of Conformity'''
+
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
   −
{| class="wikitable" style="text-align:left;"
+
# This device may not cause harmful interference.
|-
+
# This device must accept any interference received, including interference that may cause undesired operation.
| style="font-weight:bold;" | [BG] Bulgarian
  −
|С настоящото TELTONIKA NETWORKS декларира, че този RUTM50 е в съответствие със съществените изисквания и други разпоредби на Директиви 2014/53/ЕU, 2011/65/ЕU, 2009/125/EC.
  −
|-
  −
| style="font-weight:bold;" | [HR] Croatian
  −
|Ovim TELTONIKA NETWORKS izjavljuje da je ovaj RUTM50 u skladu s bitnim zahtjevima i ostalim relevantnim odredbama Direktive 2014/53/EU, 2011/65/EU, 2009/125/EC.
  −
|-
  −
| style="font-weight:bold;" | [CZ] Czech
  −
|Společnost TELTONIKA NETWORKS tímto prohlašuje, že tento RUTM50 splňuje základní požadavky a další ustanovení směrnic 2014/53/EU, 2011/65/EU, 2009/125/EC.
  −
|-
  −
| style="font-weight:bold;" | [DK] Danish
  −
|TELTONIKA NETWORKS erklærer hermed, at denne RUTM50 er i overensstemmelse med de væsentlige krav og andre bestemmelser i direktiv 2014/53/EU, 2011/65/EU, 2009/125/EC.
  −
|-
  −
| style="font-weight:bold;" | [NL] Dutch
  −
|Hereby, TELTONIKA NETWORKS declares that this RUTM50 is in compliance with the essential requirements and other relevant provisions of Richtlijnen 2014/53/EU, 2011/65/EU, 2009/125/EC.
  −
|-
  −
| style="font-weight:bold;" | [EE] Estonian
  −
|Käesolevaga kinnitab TELTONIKA NETWORKS seadme RUTM50 vastavust Direktiivide 2014/53/EU, 2011/65/EU, 2009/125/EC põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
  −
|-
  −
| style="font-weight:bold;" | [FI] Finish
  −
|TELTONIKA NETWORKS vakuuttaa täten että RUTM50 tyyppinen laite on Direktiivien 2014/53/EU, 2011/65/EU, 2009/125/EC oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
  −
|-
  −
| style="font-weight:bold;" | [FR] French
  −
|TELTONIKA NETWORKS déclare par la présente que ce RUTM50 est conforme aux exigences essentielles et autres dispositions des Directives 2014/53/EU, 2011/65/EU, 2009/125/EC.
  −
|-
  −
| style="font-weight:bold;" | [DE] German
  −
|TELTONIKA NETWORKS erklärt hiermit, dass dieses RUTM50 den grundlegenden Anforderungen und anderen Bestimmungen der Richtlinien 2014/53/EU, 2011/65/EU, 2009/125/EC entspricht.
  −
|-
  −
| style="font-weight:bold;" | [GR] Greek
  −
|Η TELTONIKA NETWORKS δηλώνει ότι το παρόν RUTM50 συμμορφώνεται με τις βασικές απαιτήσεις και άλλες διατάξεις των Οδηγιών 2014/53/ΕU, 2011/65/ΕU, 2009/125/EC.U
  −
|-
  −
| style="font-weight:bold;" | [HU] Hungarian
  −
|A TELTONIKA NETWORKS kijelenti, hogy ez a RUTM50 megfelel a 2014/53/EU, 2011/65/EU, 2009/125/EC irányelvek alapvető követelményeinek és egyéb rendelkezéseinek.
  −
|-
  −
| style="font-weight:bold;" | [IE] Irish
  −
|Leis seo, dearbhaíonn TELTONIKA NETWORKS go gcomhlíonann an RUTM50 seo bunriachtanais agus forálacha ábhartha eile Threoir 2014/53/EU, 2011/65/EU, 2009/125/EC.
  −
|-
  −
| style="font-weight:bold;" | [IT] Italian
  −
|Con la presente, TELTONIKA NETWORKS dichiara che questo RUTM50 è conforme ai requisiti essenziali e ad altre disposizioni pertinenti della Direttive 2014/53/EU, 2011/65/EU, 2009/125/EC.
  −
|-
  −
| style="font-weight:bold;" | [LV] Latvian
  −
|TELTONIKA NETWORKS ar šo paziņo, ka šis RUTM50 atbilst pamatprasībām un citiem Direktīvas 2014/53/EU, 2011/65/EU, 2009/125/EC noteikumiem.
  −
|-
  −
| style="font-weight:bold;" | [LT] Lithuanian
  −
|Šiuo dokumentu UAB TELTONIKA NETWORKS deklaruoja, kad šis RUTM50 atitinka esminius reikalavimus ir kitas 2014/53/EU, 2011/65/EU, 2009/125/EC Direktyvų nuostatas.
  −
|-
  −
| style="font-weight:bold;" | [MT] Maltese
  −
|TELTONIKA NETWORKS b'dan tiddikjara li dan RUTM50 jikkonforma mar-rekwiżiti essenzjali u dispożizzjonijiet oħra tad-Direttivi 2014/53/EU, 2011/65/EU, 2009/125/EC.
  −
|-
  −
| style="font-weight:bold;" | [NO] Norwegian
  −
|TELTONIKA NETWORKS erklærer herved at denne RUTM50 er i samsvar med de grunnleggende kravene og andre bestemmelser i Direktivene 2014/53/EU, 2011/65/EU, 2009/125/EC.
  −
|-
  −
| style="font-weight:bold;" | [PL] Polish
  −
|TELTONIKA NETWORKS niniejszym oświadcza, że niniejszy RUTM50 jest zgodny z zasadniczymi wymaganiami i innymi postanowieniami Dyrektyw 2014/53/EU, 2011/65/EU, 2009/125/EC.
  −
|-
  −
| style="font-weight:bold;" | [PT] Portuguese
  −
|A TELTONIKA NETWORKS declara que esta RUTM50 cumpre os requisitos essenciais e outras disposições das Directivas 2014/53/EU, 2011/65/EU, 2009/125/EC.
  −
|-
  −
| style="font-weight:bold;" | [RO] Romanian
  −
|TELTONIKA NETWORKS declară prin prezenta că acest RUTM50 este în conformitate cu cerințele esențiale și cu alte dispoziții ale Directivelor 2014/53/EU, 2011/65/EU, 2009/125/EC.
  −
|-
  −
| style="font-weight:bold;" | [SK] Slovak
  −
|Spoločnosť TELTONIKA NETWORKS týmto vyhlasuje, že tento RUTM50 spĺňa základné požiadavky a ďalšie ustanovenia smerníc 2014/53/EU, 2011/65/EU, 2009/125/EC.
  −
|-
  −
| style="font-weight:bold;" | [SI] Slovenian
  −
|TELTONIKA NETWORKS izjavlja, da je ta RUTM50 skladen z bistvenimi zahtevami in drugimi določbami Direktiv 2014/53/EU, 2011/65/EU, 2009/125/EC.
  −
|-
  −
| style="font-weight:bold;" | [ES] Spanish
  −
|TELTONIKA NETWORKS declara por la presente que este RUTM50 cumple los requisitos esenciales y otras disposiciones de las Directivas 2014/53/EU, 2011/65/EU, 2009/125/EC.
  −
|-
  −
| style="font-weight:bold;" | [SE] Swedish
  −
|TELTONIKA NETWORKS förklarar härmed att denna RUTM50 uppfyller de grundläggande kraven och andra bestämmelser i Direktiven 2014/53/EU och 2011/65/EU, 2009/125/EC.
  −
|}
     −
'''FCC'''
      
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
 
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Line 133: Line 61:  
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
 
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
 
* Consult the dealer or an experienced radio/TV technician for help.
 
* Consult the dealer or an experienced radio/TV technician for help.
 +
 +
'''FCC Caution:''' Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
    
'''ISED Canada'''
 
'''ISED Canada'''
Line 142: Line 72:     
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
 
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
   
# L'appareil ne doit pas produire de brouillage;
 
# L'appareil ne doit pas produire de brouillage;
 
# L'appareil doit accepter tout brouillage radioélectrique subi, mźme si le brouillage est.
 
# L'appareil doit accepter tout brouillage radioélectrique subi, mźme si le brouillage est.
Line 153: Line 82:     
[[Image:WEEE_LOGO.png|50px]] This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste.
 
[[Image:WEEE_LOGO.png|50px]] This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste.
  −
[[Image:CE_LOGO.png|50px]] Hereby, TELTONIKA NETWORKS declares that this RUTM50 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://wiki.teltonika-networks.com/view/RUTM50_CE/RED
  −
  −
[[Image:UKCA_LOGO.png|50px]] Hereby, TELTONIKA NETWORKS declares that the radio equipment type RUTM50 is in compliance with Radio Equipment Regulations 2017. The full text of the UK declaration of conformity is available at the following internet address: https://wiki.teltonika-networks.com/view/RUTM50_UKCA
      
=== RF exposure ===
 
=== RF exposure ===
Line 166: Line 91:  
Any external antenna gain must meet RF exposure and maximum radiated output power limits of the applicable rule section.
 
Any external antenna gain must meet RF exposure and maximum radiated output power limits of the applicable rule section.
   −
{| class="wikitable"  
+
'''FCC Radiation Exposure Statement:'''
 +
 
 +
This device complies with the relevant FCC RF radiation exposure limit set forth for an uncontrolled environment. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter and must be installed to provide a separation distance of at least 20 cm from all persons.
 +
 
 +
'''ISED Canada Statements:'''
 +
 
 +
This equipment complies with IC RSS‐102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.
 +
 
 +
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR‐102 établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.
 +
 
 +
----
 +
 
 +
This radio transmitter '''IC: 26511-RUTM50''' has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.
 +
 
 +
{| class="wikitable"
 
|-
 
|-
! colspan="3" style="text-align:center; font-weight:bold;" | Operating Frequency / Maximum transmission power
+
! Antenna type !! Maximum antenna gain (dBi) !! Impedance (ohm)
 
|-
 
|-
| rowspan="3" style="font-weight:bold;" | WCDMA
+
| Mobile antenna || 4.5 || 50
| B1
  −
| 1920-1980, 2110-2170 MHz, 24 dBm
   
|-
 
|-
| B5<sup>1</sup>
+
| WiFi antenna || 3.59 || 50
| 824-849, 869-894 MHz, 24 dBm
+
|}
|-
+
 
| B8
+
Le présent émetteur radio '''IC: 26511-RUTM50''' a été approuvé par Innovation, Sciences et Développement économique Canada pour fonctionner avec les types d'antenne énumérés ci‑dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est supérieur au gain maximal indiqué pour tout type figurant sur la liste, sont strictement interdits pour l'exploitation de l'émetteur.
| 880-915, 925-960 MHz, 24 dBm
+
 
|-
+
{| class="wikitable"
| rowspan="7" style="font-weight:bold;" | LTE-FDD
  −
| B1
  −
| 1920-1980, 2110-2170 MHz, 23 dBm
  −
|-
  −
| B3
  −
| 1710-1785, 1805-1880 MHz, 23 dBm
  −
|-
  −
| B5<sup>1</sup>
  −
| 824-849, 869-894 MHz, 24 dBm
  −
|-
  −
| B7
  −
| 2500-2570, 2620-2690 MHz, 24 dBm
  −
|-
  −
| B8
  −
| 880-915, 925-960 MHz, 23 dBm
  −
|-
  −
| B20
  −
| 832-862, 791-821 MHz, 23 dBm
  −
|-
  −
| B28
  −
| 703-748, 758-803 MHz, 23 dBm
  −
|-
  −
| rowspan="5" style="font-weight:bold;" | LTE-TDD
  −
| B38
  −
| 2570-2620 MHz, 23 dBm
  −
|-
  −
| B40
  −
| 2300-2400 MHz, 23 dBm
  −
|-
  −
| B41<sup>2</sup>
  −
| 2300-2400 MHz, 23 dBm
  −
|-
  −
| B42
  −
| 3400-3600 MHz, 26 dBm
  −
|-
  −
| B43
  −
| 3600-3800 MHz, 26 dBm
  −
|-
  −
| rowspan="12" style="font-weight:bold;" | 5G NR (SA, NSA)
  −
| n1
  −
| 1920-1680, 2110-2170 MHz, 23 dBm
  −
|-
  −
| n3
  −
| 1710-1785, 1805-1880 MHz, 23 dBm
  −
|-
  −
| n5<sup>1</sup>
  −
| 824-849, 869-894 MHz, 23 dBm
  −
|-
  −
| n7
  −
| 2500-2570, 2620-2690 MHz, 23 dBm
  −
|-
  −
| n8
  −
| 880-915, 925-960 MHz, 23 dBm
  −
|-
  −
| n20
  −
| 832-862, 791-821 MHz, 23 dBm
  −
|-
  −
| n28
  −
| 703-748, 758-803 MHz, 23 dBm
  −
|-
  −
| n38
  −
| 2570-2620 MHz, 23 dBm
  −
|-
  −
| n40
  −
| 2300-2400 MHz, 23 dBm
  −
|-
  −
| n41
  −
| 2496-2690 MHz, 26 dBm
  −
|-
  −
| n77
  −
| 3300-4200 MHz, 26 dBm
  −
|-
  −
| n78
  −
| 3300-3800 MHz, 26 dBm
  −
|-
  −
| style="font-weight:bold;" | Wi-Fi 2.4 GHz
  −
| colspan="2" | 2412-2472 MHz, 20 dBm
  −
|-
  −
| rowspan="4" style="font-weight:bold;" | Wi-Fi 5 GHz
  −
| UNII-1 Band 1
  −
| 5180-5240 MHz, 23 dBm
  −
|-
  −
| UNII-2A Band 2
  −
| 5260-5320 MHz, 30 dBm
  −
|-
  −
| UNII-2C Band 3
  −
| 5500-5700 MHz, 30 dBm
  −
|-
  −
| UNII-3 Band 4
  −
| 5745-5825 MHz, 13.98 dBm
  −
|-
  −
| rowspan="4" style="font-weight:bold;" | GNSS
  −
| GPS Band L1, L5
  −
| 1575.42, 1176.45 MHz
   
|-
 
|-
| Galileo Band E1, E5
+
! Type d’antenne !! Gain d’antenne maxima (dBi) !! Impédance (ohm)
| 1575.42, 1176.45 MHz
   
|-
 
|-
| BDS Band B11
+
| Antenne mobile || 4.5 || 50
| 1561.098 MHz
   
|-
 
|-
| GLONASS Band G1
+
| Antenne WiFi || 3.59 || 50
| 1602+n*0.5625 MHz
   
|}
 
|}
   −
<small><sup>1</sup> – Not supported in Europe region.</small>
+
----
 +
 
 +
1. The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
 +
 
 +
2. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit.
   −
<small><sup>2</sup> – Not supported in Europe and Oceania regions.</small>
+
3. For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits as appropriate.
   −
'''ISED Canada Exposure'''
     −
This equipment complies with IC RSS‐102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body.
+
1. Les dispositifs fonctionnant dans la bande de 5 150 à 5 250 MHz sont réservés uniquement pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux.
   −
Cet équipement est conforme aux limites d'exposition aux radiations IC CNR‐102 établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.
+
2. Pour les dispositifs munis d’antennes amovibles, le gain maximal d’antenne permis pour les dispositifs utilisant les bandes de 5 250 à 5 350 MHz et de 5 470 à 5 725 MHz doit être conforme à la limite de la p.i.r.e.
    +
3. Pour les dispositifs munis d’antennes amovibles, le gain maximal d’antenne permis (pour les dispositifs utilisant la bande de 5 725 à 5 850 MHz) doit être conforme à la limite de la p.i.r.e. spécifiée.
    
=== Operating conditions ===
 
=== Operating conditions ===
Line 371: Line 215:  
Need some help setting up your new Teltonika Networks RUTM50 Industrial 5G Router? Watch our quick start guide video and follow the step by step instructions to easily set up your new router for operation.
 
Need some help setting up your new Teltonika Networks RUTM50 Industrial 5G Router? Watch our quick start guide video and follow the step by step instructions to easily set up your new router for operation.
   −
<youtube>a5jLmUI_eWo</youtube>
+
<youtube>UVZfIjCPjQY</youtube>
 
<br>
 
<br>
 +
    
== Hardware installation ==
 
== Hardware installation ==
Line 404: Line 249:  
</table>
 
</table>
   −
== Configure your computer (Windows) ==
+
{{Template: Configure_your_computer_LAN_Windows
 +
<!------------------------DEVICE----------------------->
 +
| name        = RUTM50
 +
}}
   −
<br>
+
 
<table>
+
{{Template: Configure_your_computer_WiFi_Windows
    <tr>
+
<!------------------------DEVICE----------------------->
        <td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; margin: 10px; padding-bottom: 25px;">1. Ensure the Wireless network connection is Enabled. Go to Start — Control Panel — Network and Internet — Network and Sharing Center. Click on the '''Change adapter settings''' in the left panel, then right-click on Wireless Network Adapter, and select Enable.</td>
+
| name        = RUTM50
        <td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; width: 680px; margin: 10px; padding-bottom: 25px;">[[File:Configure_your_computer_step_1.png|right|600 px]]</td>
+
}}
    </tr>
  −
    <tr>
  −
        <td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-top: 25px;">2. Check if IP and DNS are obtained automatically. Right-click on Wireless Network Adapter and select Properties. Then select '''Internet Protocol Version 4''' and click Properties.
  −
<br>3. If not selected, check to '''obtain an IP address''' and '''obtain DNS server address automatically'''. Click OK.</td>
  −
        <td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-bottom: 25px; padding-top: 25px;">[[File:Configure_your_computer_step_2.png|right|500 px]]</td>
  −
    </tr>
  −
    <tr style="border: 1px solid #E8E8E8;">
  −
        <td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-top: 25px;">4. Connect to a wireless network by right-clicking on Wireless Network Adapter and selecting Connect.</td>
  −
        <td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-bottom: 25px; ; padding-top: 25px;">[[File:Configure_your_computer_step_3.png|right|600 px]]</td>
  −
    </tr>
  −
    <tr style="border: 1px solid #E8E8E8;">
  −
        <td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-top: 25px;">5. Choose the wireless network RUTM50 **** from the list and click Connect. Enter the WiFi password located on the device's label.</td>
  −
        <td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-bottom: 25px; ; padding-top: 25px;">[[File:Configure_your_computer_step_4.png|right|400 px]]</td>
  −
    </tr>
  −
</table>
      
== Login to device ==
 
== Login to device ==