5,719
edits
Changes
→Login to device
<br>
<br>
<table>
<table>
<tr>
<tr>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; margin: 10px; padding-bottom: 25px;">1. To enter the managed switch 's Web interface (WebUI), type http://192.168.1.2 into the URL field of your Internet browser.<br><br>2. When prompted for authentication enter the username admin and enter the password located on the device information label/engraving. </td>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; margin: 10px; padding-bottom: 25px;">1. Ensure the Network connection is Enabled. Go to Start — Control Panel — Network and Internet — Network and Sharing Center. Click on the '''Change adapter settings''' in the left panel, then right-click on Network Adapter, and select Enable.</td>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; width: 680px; margin: 10px; padding-bottom: 25px;">[[File:Configure-your-network-1.jpg|right|600 px]]</td>
</tr>
<tr>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-top: 25px;">2. Right-click on Network Adapter and select Properties. Then select '''Internet Protocol Version 4''' and click Properties.
3. If not selected, check to '''Use the following IP address''' and '''enter 192.168.1.5'''.
4. Click in the '''Subnet mask''' it should get auto-filled with 255.255.255.0. Click OK.
</td><td>[[File:Configure_your_computer_WIndows_TCP_IP_5_v1.jpg|right|500x500px]]</td></tr>
</table>
<br>
<table>
<tr>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; margin: 10px; padding-bottom: 25px;">5. To enter the managed switch 's Web interface (WebUI), type http://192.168.1.2 into the URL field of your Internet browser.<br><br>2. When prompted for authentication enter the username admin and enter the password located on the device information label/engraving. </td>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; width: 680px; margin: 10px; padding-bottom: 25px;">[[File:WebUI Login to device step v2.png|right|600 px]]</td>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; width: 680px; margin: 10px; padding-bottom: 25px;">[[File:WebUI Login to device step v2.png|right|600 px]]</td>
</tr>
</tr>
<tr>
<tr>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-top: 25px;">3. After logging in, you must set a new password for security reasons. You will not be able to interact with the managed switch ’s WebUI until the default password is changed. The new password must consist of a minimum of '''8 characters'''. Requirements: one uppercase letter, one lowercase letter, and one digit.<br>
<td style="border-bottom: 1px solid #e8e8e8; vertical-align: top; padding-top: 25px;">6. After logging in, you must set a new password for security reasons. You will not be able to interact with the managed switch ’s WebUI until the default password is changed. The new password must consist of a minimum of '''8 characters'''. Requirements: one uppercase letter, one lowercase letter, and one digit.<br>
</td>
</td>
</tr>
</tr>
</table>
</table>
[[Category: TSW202]]
[[Category: TSW202]]
