RMS Configuration menu

From Teltonika Networks Wiki
Revision as of 09:33, 15 December 2022 by JustasB (talk | contribs) (Created page with "__TOC__ ==Summary== The '''Configuration''' top control menu is located in the '''Management''' section. It can be used to either configure device(s)...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > IoT Platforms > RMS > RMS Manual > RMS Management > RMS Devices > RMS Configuration menu

Summary

The Configuration top control menu is located in the Management section. It can be used to either configure device(s) or upload configuration (backup) files to devices registered on your RMS profile. This section of the RMS user manual provides an overview of the functions of the Configuration menu.

Configure devices

The Configure device option allows you to modify configuration for your selected device(s). To configure your devices go to the RMS web page, Left sidebar panel, (Management → Devices) and click on Devices submenu.

Scroll your mouse pointer to the Top control Configuration menu and select Configure device (Configuration → Configure device).

RMS-device-menu-left-sidebar-panel.jpg RMS-top-menu-configuration-mobile.jpg

The Configuration function is used to change configuration of devices selected from your device table. You will get different configuration options depending on the device.

Step by step instructions


  1. Select the device(s) that you wish to configure.
  2. Move your mouse pointer to the Configuration menu and click Configure device.
  3. You will get a pop-up box, where you will be able to choose settings you want to configure.
  4. Fill out the information and click Save button when ready.
  5. In the next window will display configuration progress.
  6. Click the Close button and close the Configure devices window.

Important!

  • Allow some time for your device(s) to load new settings. It might take some time.


Upload backup

Using Upload backup option you can upload configuration (backup) file for your selected device(s). To upload backup files go to the RMS web page, Left sidebar panel, (Management → Devices) and click on Devices.

Upload backup12023-08-28 13h54 22.png

Select the desired devices on which you'd like to upload the backup configuration/file, move your mouse pointer to the Top control Actions menu and select Upload backup (Actions → Upload backup).

Upload backup2023-08-28 13h26 47.png

The Upload backup option provides you with the ability to upload configuration files to devices registered on your RMS profile.

Step by step instructions


Read the instructions to learn how to upload configuration (backup) for your device(s).

  1. Select the device(s) that will upload the configuration (backup) file to.
  2. Move your mouse pointer to the Actions menu and click Upload backup.
  3. After a new window will open. Select the configuration file you've uploaded to RMS previously from a drop-down menu, upload a new one, or choose from periodic backups. And click theSet Update button.
  4. In the next window will display configuration upload progress.
  5. After the configuration (backup) is uploaded in the Status column you will you will get a message: Done.

Important!

  • Allow some time for your device(s) to load the new configuration. They won't be reachable for up to 3 minutes.
  • When the red circle (Offline) will change to green circle (Online) configuration got uploaded and device(s) are fully operational.

VPN Configuration

The VPN Configuration gives you an option set up a VPN. To configure your devices go to the RMS web page, Left sidebar panel, (Management → Devices) and click on Devices submenu.

Move your mouse pointer to the Top control Configuration menu and select VPN Configuration (Configuration → VPN Configuration).

RMS-device-menu-left-sidebar-panel.jpg Rms manual top menu vpn config v1.png

The VPN Configuration function is used to set up the VPN configuration of devices selected from your device table. You will get different configuration options depending on the device.

Rms manual top add new vpn configuration v1.png

Step by step instructions


  1. Select the device(s) that you wish to configure.
  2. Move your mouse pointer to the Configuration menu and click VPN Configuration.
  3. You will get a pop-up, if it's the first time you perform a VPN configuration, you will click the Add new button.
  4. In the next window, you will be able to set VPN settings.
  5. For additional information on how to configure, look at configuration examples for RUTX11 and RUT955 routers.
  6. Finally, click the Save button when ready.
  7. The next window will display configuration progress.
  8. Click the Close button and close the VPN configuration window.