Changes

For the end devices to be able to reach each other, we are going to need to modify Firewall zones in both '''RUT1''' and '''RUT2'''. Follow these steps to edit Firewall zones:

For the end devices to be able to reach each other, we are going to need to modify Firewall zones in both '''RUT1''' and '''RUT2'''. Follow these steps to edit Firewall zones:

*Navigate to '''Network -> Firewall -> General settings'''.

*Navigate to '''Network -> Firewall -> General settings'''.

*In the zones section, click the edit button on WAN zone (wan -> REJECT).

*In the zones section, click the edit button on LAN zone:

[[File:FW Zones section.png|900px|border|class=tlt-border]]

[[File:Newfilelan.png|950px|border|class=tlt-border]]

*In the '''Inter-Zone Forwarding''' section, click on '''Allow forwarding to destination zones''' and select '''rms''' (for example, rms_xzkEgQ: openvpn). This allows traffic originating from WAN side to reach RMS VPN.

*In the '''Inter-Zone Forwarding''' section, click on '''Allow forwarding to destination zones''' and select '''rms''' (for example, rms_xzkEgQ: openvpn). This allows traffic from LAN to reach RMS VPN.

[[File:RMS Inter zone forwarding.png|900px|border|class=tlt-border]]

[[File:Forwardingzoneslan.png|450px|border|class=tlt-border]]

After Clicking on '''Save & Apply''' for both routers, the setup is completed and the LAN to LAN communication between devices should work.

After clicking on '''Save & Apply''' for both routers, the setup is completed and the LAN to LAN communication between devices should work.

=== Testing the configuration===

=== Testing the configuration===