RUT230 Reboot (legacy WebUI)

From Teltonika Networks Wiki
Revision as of 14:19, 18 November 2021 by Gytispieze (talk | contribs) (Gytispieze moved page Draft:RUT230 Reboot (legacy WebUI) to RUT230 Reboot (legacy WebUI) without leaving a redirect)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > RUT Routers > RUT230 > RUT230 Manual > RUT230 Legacy WebUI > RUT230 System section (legacy) > RUT230 Reboot (legacy WebUI)

The information in this page is updated in accordance with firmware version RUT2XX_R_00.01.14.7.

Notice: This device has entered it's EOL (End of Life) cycle. For more information, visit our EOL policy here. Temporarily, some content in this page might not match features found in firmware listed above.

Note: this user manual page is for RUT230's old WebUI style available in earlier FW versions. Click here for information based on the latest FW version.

Summary

The Reboot window is used only to reboot the device. Click the 'Reboot' button if you wish to reboot the device.

Networking rut manual reboot.png

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=RUT230_Reboot_(legacy_WebUI)&oldid=85643"