31,703
edits
Changes
no edit summary
<tr>
<tr>
<td>Enable SNMP service</td>
<td>Enable SNMP service</td>
<td>yes {{!}} no; Default: '''no'''</td>
<td>yes | no; Default: '''no'''</td>
<td>Toggles SNMP ON or OFF</td>
<td>Toggles SNMP ON or OFF</td>
</tr>
</tr>
<tr>
<tr>
<td>Enable remote access</td>
<td>Enable remote access</td>
<td>yes {{!}} no; Default: '''no'''</td>
<td>yes | no; Default: '''no'''</td>
<td>Opens a port in firewall so that the SNMP service may be reached remotely from WAN</td>
<td>Opens a port in firewall so that the SNMP service may be reached remotely from WAN</td>
</tr>
</tr>
<tr>
<tr>
<td>Community</td>
<td>Community</td>
<td>Public {{!}} Pirvate {{!}} Custom; Default: '''Public'''</td>
<td>Public | Pirvate | Custom; Default: '''Public'''</td>
<td>SNMP Community is an ID that allows access to a router's SNMP data</td>
<td>SNMP Community is an ID that allows access to a router's SNMP data</td>
</tr>
</tr>
<tr>
<tr>
<td>SNMP version</td>
<td>SNMP version</td>
<td>v1/v2 {{!}} v1/v2/v3 {{!}} v3; Default: '''v1/v2'''</td>
<td>v1/v2 | v1/v2/v3 | v3; Default: '''v1/v2'''</td>
<td>Specifies which SNMP version is to be used</td>
<td>Specifies which SNMP version is to be used</td>
</tr>
</tr>
<tr>
<tr>
<td>SNMP trap</td>
<td>SNMP trap</td>
<td>yes {{!}} no; Default: '''no'''</td>
<td>yes | no; Default: '''no'''</td>
<td>Toggles SNMP trap ON or OFF</td>
<td>Toggles SNMP trap ON or OFF</td>
</tr>
</tr>
<tr>
<tr>
<td>Host/IP</td>
<td>Host/IP</td>
<td>host {{!}} ip; Default: " "</td>
<td>host | ip; Default: " "</td>
<td>Host to transfer SNMP traffic to</td>
<td>Host to transfer SNMP traffic to</td>
</tr>
</tr>
<tr>
<tr>
<td>Community</td>
<td>Community</td>
<td>Public {{!}} Pirvate; Default: '''Public'''</td>
<td>Public | Pirvate; Default: '''Public'''</td>
<td>SNMP Community is an ID that allows access to a router's SNMP data</td>
<td>SNMP Community is an ID that allows access to a router's SNMP data</td>
</tr>
</tr>
</tr>
</tr>
</table>
</table>
[[Category:RUT230 WebUI]]
