RUT230 SSHFS

Revision as of 13:29, 18 November 2021 by Gytispieze (talk | contribs) (Gytispieze moved page Draft:RUT230 SSHFS to RUT230 SSHFS without leaving a redirect)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > RUT Routers > RUT230 > RUT230 Manual > RUT230 WebUI > RUT230 Services section > RUT230 SSHFS

The information in this page is updated in accordance with firmware version RUT2_R_00.07.03.4.

Notice: This device has entered it's EOL (End of Life) cycle. For more information, visit our EOL policy here. Temporarily, some content in this page might not match features found in firmware listed above.

Summary

SSHFS is a tool, which allows you to mount a remote filesystem (in remote SSH server) to your RUT230 device using SSH. This service is safe to use as it authenticates connections and encrypts them.

This chapter of the user manual provides an overview of the SSHFS page for RUT230 devices.


SSHFS is additional software that can be installed from the System → Package Manager page.

SSHFS

SSHFS configuration consists of setting up authentication, port and mount information parameters. Below is an example oh the SSHFS configuration page.

Networking rutos manual sshfs v3.png

Field Value Description
Enable off | on; default: off Turns the SSHFS service on or off.
Hostname string; default: none Hostname of the remote SSH server.
Port integer [0..65535]; default: none Port of the remote SSH server.
Username string; default: none Username of the remote SSH server.
Password string; default: none Password of the remote SSH server.
Mount Point filepath; default: /sshmount Mount point of remote file system in the RUT230. Remote file system has to be mounted at root / level. By default the remote file system will be mounted on /sshmount, directory will be automatically created if does not exist yet.
Mount Path filepath; default: /home/ Mount path in the remote SSH server. For example, if SSH server is hosted on Ubuntu operating system, the Mount Path could look like this (depending on your needs): /home/username/