Difference between revisions of "RUT230 TR-069"

From Teltonika Networks Wiki
(Created page with "{{Template: Networking_rutos_manual_tr-069 <!------------------------DEVICE-----------------------> | name = RUT230 | series = RUT2 }}")
 
m (Gytispieze moved page Draft:RUT230 TR-069 to RUT230 TR-069 without leaving a redirect)
 
(No difference)

Latest revision as of 13:29, 18 November 2021

Main Page > RUT Routers > RUT230 > RUT230 Manual > RUT230 WebUI > RUT230 Services section > RUT230 TR-069

The information in this page is updated in accordance with firmware version RUT2_R_00.07.03.4.

Notice: This device has entered it's EOL (End of Life) cycle. For more information, visit our EOL policy here. Temporarily, some content in this page might not match features found in firmware listed above.

Summary

TR-069 (Technical Report 069) is an application layer protocol designed for management of equipment connected to a remote network.

This chapter of the user manual provides an overview of the UPnP page in RUT230 devices.


TR-069 is additional software that can be installed from the System → Package Manager page.

TR-069 Client Configuration

Networking rutx manual tr-069 client configuration v1.png

Field Value Description
Enable off | on; default: off Turns TR-069 client on or off.
Periodic enable off | on; default: on Turns periodic data transmissions to server on or off.
Accept server request off | on; default: off When enabled the device accepts connection requests from servers.
Sending interval integer [60..9999999]; default: 100 Periodic data transmission frequency (in seconds).
Username string; default: easycwmp Username used for authentication to a TR-069 server.
Password string; default: easycwmp Password used for authentication to a TR-069 server.
URL host | ip; default: http://192.168.1.110:8080/openacs/acs IP address or hostname of a TR-069 server.

Management via TR-069

TR-069 can be used to set or get values from RUT devices. Below is a list of commands used for device management via TR-069.

  • R - read only;
  • RW - read/write;
  • string(64) - 64 bit string;
  • string(256) - 256 bit string;
  • unsignedInt - integer storing only positive values.

Device Information:

  1. DeviceInfo.Manufacturer - device manufacturer (e.g., Teltonika) R
  2. DeviceInfo.ProductClass - device model (e.g., RUT230) R
  3. DeviceInfo.SerialNumber - device serial number (e.g., 1000111111) R
  4. DeviceInfo.UpTime - device uptime R;

Mobile Information:

  1. MobileInfo.ICCID - SIM ICCID R;
  2. MobileInfo.Operator - name of operator used R;
  3. MobileInfo.SentThisMonth - bytes sent this month R;
  4. MobileInfo.ReceivedThisMonth - bytes received this month R;