Changes

{{Template: leds_intro}} RUT240 router.

{{Template: leds_intro}} RUT240 router. The information applies for both Quectel and MeigLink modules used in Teltonika devices.

__TOC__

__TOC__

==Power LED==

==Power LED==

==Connection status LEDs==

==Connection status LEDs==

The '''connection status LED''' is located on the bottom right corner of the front panel, to the left of the signal strength indication LEDs:

The '''connection status LEDs''' are located on the left side of the front panel, between the power connector and the signal strength indication LEDs:

[[File:Rut240 connection status led v2.png|300px]]

[[File:Rut240 connection status led v2.png|300px]]

{{Template: rut240_connection_status_led_table}}

{{Template: rut240_connection_status_leds_table}}

==Signal strength LEDs==

==Signal strength LEDs==

The '''signal strength LEDs''' are located on the bottom right corner of the front panel, to the right of the connection status LED:

The '''signal strength LEDs''' are located in the center of the front panel, to the right of the connection status LEDs:

[[File:Rut240 signal strength leds v2.png|300px]]

[[File:Rut240 signal strength leds v2.png|300px]]

----

----

After the router gets powered up, all signal strength LEDs will turn ON and stay ON for about 40 seconds or until the router's modem registers on a network - after this, the LEDs will start displaying the router's current signal strength.

After the router gets powered up, all signal strength LEDs will turn ON and stay ON for about 40 seconds or until the router's modem registers on a network - after this, the LEDs will start displaying the router's current signal strength.