Changes

The '''Broker''' will “listen” for connections on the specified Local port. In order to accept connections from WAN, you also need to check Enable Remote Access.

The '''Broker''' will “listen” for connections on the specified Local port. In order to accept connections from WAN, you also need to check Enable Remote Access.

[[Image:Services mqtt broker.PNG]]

[[Image:Networking rut manual mqtt broker.png|border]]

<table class="nd-mantable">

<table class="nd-mantable">

The MQTT '''Security''' tab is used to establish MQTT connection security via TLS/SSL.

The MQTT '''Security''' tab is used to establish MQTT connection security via TLS/SSL.

[[Image:Services mqtt broker settings security.PNG]]

[[Image:Networking rut manual mqtt security.png|border]]

<table class="nd-mantable">

<table class="nd-mantable">

The MQTT Broker also supports a functionality called '''Bridge'''. An MQTT Bridge is used for the communication between two MQTT Brokers. The window of Bridge parameters is presented below. Some of these are mandatory as they are needed to create a connection: Connection Name, Remote Address and Remote Port. For more information on '''MQTT Bridge''' parameters you can read the official mosquitto.conf manual page.

The MQTT Broker also supports a functionality called '''Bridge'''. An MQTT Bridge is used for the communication between two MQTT Brokers. The window of Bridge parameters is presented below. Some of these are mandatory as they are needed to create a connection: Connection Name, Remote Address and Remote Port. For more information on '''MQTT Bridge''' parameters you can read the official mosquitto.conf manual page.

[[Image:Services mqtt broker settings bridge.PNG]]

[[Image:Networking rut manual mqtt bridge.png|border]]

<table class="nd-mantable">

<table class="nd-mantable">