8,290
edits
Changes
no edit summary
{{Template: Networking_rutos_manual_leds
{{Template: leds_intro}} RUT260 router.
__TOC__
==Power LED==
The '''power LED''' is located on the bottom left corner of the front panel, just under the power connector:
| 5g = 1 <!-- 1 has 5G; 0 doesn't have 5G -->
[[File:Rut240 power led v2.png|300px]]
| eth = 1 <!-- 1 has ETH; 0 doesn't have ETH -->
{{Template: rut_power_led_table}}
==Ethernet port LEDs==
| power_leds = 1 <!-- number of power LEDs -->
| wan = 1 <!-- 1 has WAN type LEDs; 0 doesn't have WAN type LEDs -->
The '''Ethernet port LEDs''' are located on the router's front panel, under each respective Ethernet port:
[[File:Rut240 ethernet port leds v2.png|300px]]
{{Template: rut_ethernet_port_led_table}}
<span style="color: #0054A6;">'''*'''</span> The '''bootloader menu''' is a special router state from which certain upgrades can be performed. For more information on the bootloader menu, click [[Bootloader menu|here]]
==Connection status LEDs==
The '''connection status LEDs''' are located on the left side of the front panel, between the power connector and the signal strength indication LEDs:
[[File:Rut240 connection status led v2.png|300px]]
{{Template: rut240_connection_status_leds_table}}
==Signal strength LEDs==
The '''signal strength LEDs''' are located in the center of the front panel, to the right of the connection status LEDs:
[[File:Rut240 signal strength leds v2.png|300px]]
{{signal strength leds table}}
----
After the router gets powered up, all signal strength LEDs will turn ON and stay ON for about 40 seconds or until the router's modem registers on a network - after this, the LEDs will start displaying the router's current signal strength.