Teltonika Networks Wiki

Changes

RUT260 LEDs (view source)

Revision as of 13:12, 4 September 2023

729 bytes removed ,  13:12, 4 September 2023
no edit summary
Line 1: Line 1: −
{{Template: leds_intro}} RUT260 router.
+
{{Template: Networking_rutos_manual_leds
−
__TOC__
+
<!------------------------DEVICE----------------------->
−
==Power LED==
+
| name        = RUT2M
−
 
+
| series      = RUT260
−
The '''power LED''' is located on the bottom left corner of the front panel, just under the power connector:
+
<!----------------------SEPARATORS--------------------->
−
 
+
| 2g          = 0  <!-- 1 has 2G; 0 doesn't have 2G -->
−
[[File:Rut240 power led v2.png|300px]]
+
| eth        = 1  <!-- 1 has ETH; 0 doesn't have ETH -->
−
 
+
| eth_leds    = 1  <!-- 1 for green; 2 for green & orange -->
−
{{Template: rut_power_led_table}}
+
| mobile      = 1  <!-- 1 has mobile; 0 doesn't have mobile -->
−
 
+
| mobile_leds = 5  <!-- number of mobile signal strength type LEDs -->
−
==Ethernet port LEDs==
+
| power_leds  = 1  <!-- number of power LEDs -->
−
 
+
| wan        = 1  <!-- 1 has WAN type LEDs; 0 doesn't have WAN type LEDs -->
−
The '''Ethernet port LEDs''' are located on the router's front panel, under each respective Ethernet port:
+
| wifi        = 0  <!-- 1 has WiFi band LEDs; 0 doesn't have WiFi band LEDs -->
−
 
+
}}
−
[[File:Rut240 ethernet port leds v2.png|300px]]
  −
 
  −
{{Template: rut_ethernet_port_led_table}}
  −
 
  −
<span style="color: #0054A6;">'''*'''</span> The '''bootloader menu''' is a special router state from which certain upgrades can be performed. For more information on the bootloader menu, click [[Bootloader menu|here]]
  −
 
  −
==Connection status LEDs==
  −
 
  −
The '''connection status LEDs''' are located on the left side of the front panel, between the power connector and the signal strength indication LEDs:
  −
 
  −
[[File:Rut240 connection status led v2.png|300px]]
  −
 
  −
{{Template: rut240_connection_status_leds_table}}
  −
 
  −
==Signal strength LEDs==
  −
 
  −
The '''signal strength LEDs''' are located in the center of the front panel, to the right of the connection status LEDs:
  −
 
  −
[[File:Rut240 signal strength leds v2.png|300px]]
  −
 
  −
{{signal strength leds table}}
  −
----
  −
After the router gets powered up, all signal strength LEDs will turn ON and stay ON for about 40 seconds or until the router's modem registers on a network - after this, the LEDs will start displaying the router's current signal strength.
 
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/110613"