Jump to content

RUT271 Interfaces

From Teltonika Networks Wiki
Revision as of 11:18, 26 March 2026 by TomasV (talk | contribs) (Created page with "{{Device interfaces | eth = 2 x RJ45 ethernet ports | dsl = | sim = 1 x SIM slot | wifi = 2.4 GHz radio | cell = 5G RedCap | io = 1 x Digital Input, 1 x Digital Output on 4-pin power connector | uart = Located on the device PCB for manufacturing purposes | reset = Physical button | serial = | mbus = | usb = | microsd = | sfp = | bt = | wan = Outbound traffic only | lan = Inbound...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

Hardware Interfaces

Device-supported hardware interfaces

InterfaceDetails
Ethernet ports2 x RJ45 ethernet ports
SIM Slot1 x SIM slot
Wireless Radio2.4 GHz radio
Cellular Radio5G RedCap
I/O1 x Digital Input, 1 x Digital Output on 4-pin power connector
UARTLocated on the device PCB for manufacturing purposes
Reset ButtonPhysical button

Logical Interfaces

InterfaceDetails
WANOutbound traffic only
LANInbound traffic only
WLANWireless LAN
GSMCellular interface

Management Interfaces

All of the device management interfaces that are enabled by default

InterfaceDetails
Terminal AccessSSH
WebUI AccessHTTPS
SMS UtilitiesDevice must have an active SIM card installed

Default Open Ports

Every open port on the device by default

ServiceDetails
SSHPort 22/tcp (LAN only)
DNSPort 53/tcp
HTTPPort 80/tcp (redirects to HTTPS only)
HTTPSPort 443/tcp
DHCPPort 67/udp
DHCPv6Port 546/547/udp (IPv6 only)

LEDs

Visual Diagnostic Interfaces for Real-Time Chassis Monitoring

ItemDetails
Power LEDPower status indicator
Mobile Network LEDs4G / 5G
Signal Strength LEDsIndicates mobile signal strength
Ethernet LEDActivity/status indicator