RUT301 Interfaces
Revision as of 11:36, 26 March 2026 by TomasV (talk | contribs) (Created page with "{{Device interfaces | eth = 5 x RJ45 ethernet ports | dsl = | sim = | wifi = | cell = | io = 1 x Digital Input, 1 x Digital Output on 4-pin power connector | uart = Located on the device PCB for manufacturing purposes | reset = Physical button | serial = | mbus = | usb = 1 x USB A port for external devices | microsd = | sfp = | bt = | wan = Outbound traffic only | lan = Inbound...")
Hardware Interfaces
Device-supported hardware interfaces
| Interface | Details |
|---|---|
| Ethernet ports | 5 x RJ45 ethernet ports |
| I/O | 1 x Digital Input, 1 x Digital Output on 4-pin power connector |
| UART | Located on the device PCB for manufacturing purposes |
| Reset Button | Physical button |
| USB port | 1 x USB A port for external devices |
Logical Interfaces
| Interface | Details |
|---|---|
| WAN | Outbound traffic only |
| LAN | Inbound traffic only |
Management Interfaces
All of the device management interfaces that are enabled by default
| Interface | Details |
|---|---|
| Terminal Access | SSH |
| WebUI Access | HTTPS |
Default Open Ports
Every open port on the device by default
| Service | Details |
|---|---|
| SSH | Port 22/tcp (LAN only) |
| DNS | Port 53/tcp |
| HTTP | Port 80/tcp (redirects to HTTPS only) |
| HTTPS | Port 443/tcp |
| DHCP | Port 67/udp |
| DHCPv6 | Port 546/547/udp (IPv6 only) |
LEDs
Visual Diagnostic Interfaces for Real-Time Chassis Monitoring
| Item | Details |
|---|---|
| Power LED | Power status indicator |
| Ethernet LED | Activity/status indicator |