RUT301 TR-069

Main Page > RUT Routers > RUT301 > RUT301 Manual > RUT301 WebUI > RUT301 Services section > RUT301 TR-069

The information in this page is updated in accordance with firmware version RUT301_R_00.07.07.2.

Summary

TR-069 (Technical Report 069) is an application layer protocol designed for management of equipment connected to a remote network.

This chapter of the user manual provides an overview of the UPnP page in RUT301 devices.


TR-069 is additional software that can be installed from the System → Package Manager page.

TR-069 Client Configuration

Networking rutx manual tr-069 client configuration v2.png

Field Value Description
Enable off | on; default: off Turns TR-069 client on or off.
Periodic enable off | on; default: on Turns periodic data transmissions to server on or off.
Accept server request off | on; default: off When enabled the device accepts connection requests from servers.
Sending interval integer [60..9999999]; default: 100 Periodic data transmission frequency (in seconds).
Username string; default: easycwmp Username used for authentication to a TR-069 server.
Password string; default: easycwmp Password used for authentication to a TR-069 server.
URL host | ip; default: http://192.168.1.110:8080/openacs/acs IP address or hostname of a TR-069 server.

Management via TR-069

TR-069 can be used to set or get values from RUT devices. Below is a list of commands used for device management via TR-069.

  • R - read only;
  • RW - read/write;
  • string(64) - 64 bit string;
  • string(256) - 256 bit string;
  • unsignedInt - integer storing only positive values.

Device Information:

  1. DeviceInfo.HardwareVersion - device hardware version (e.g., 0201) R
  2. DeviceInfo.Manufacturer - device manufacturer (e.g., Teltonika) R
  3. DeviceInfo.ManufacturerOUI - organizationally unique identifier of the device manufacture (e.g., 001E42) R
  4. DeviceInfo.ProductClass - device model (e.g., RUT301) R
  5. DeviceInfo.ProvisioningCode - provisioning code
  6. DeviceInfo.SerialNumber - device serial number (e.g., 1000111111) R
  7. DeviceInfo.SoftwareVersion - device software version (e.g., RUT301_R_00.0X.XX) R
  8. DeviceInfo.SpecVersion - device special version (e.g., 1.0) R



Device IP interface information:

  1. IP.Interface.1.Enable - interface enabled/disabled (e.g., true) R
  2. IP.Interface.1.IPv4Address.1.Enable - IPv4 address enabled/disabled (e.g., 1) R
  3. IP.Interface.1.IPv4Address.1.IPAddress - IPv4 address (e.g., 192.168.1.1) R
  4. IP.Interface.1.Name - interface name (e.g., lan) R

Device Management Server information:

  1. ManagementServer.ConnectionRequestPassword - connection request password (e.g., randompassword) R
  2. ManagementServer.ConnectionRequestURL - connection request URL R
  3. ManagementServer.ConnectionRequestUsername - connection request username (e.g., 001E42-RUTX14-0000000000) R
  4. ManagementServer.ParameterKey -
  5. ManagementServer.Password -
  6. ManagementServer.PeriodicInformEnable - enabled/disabled TR-069 client periodic data transmission to TR-069 server (e.g., true) R
  7. ManagementServer.PeriodicInformInterval - periodic data transmission interval (e.g., 300) R
  8. ManagementServer.PeriodicInformTime - periodic information time (e.g., 1/1/1970, 8:09:27 PM) R
  9. ManagementServer.URL - server URL R
  10. ManagementServer.Username - server username R

Device ID information:

  1. DeviceID.ID - device ID (e.g., 001E42-RUTX14-0000000000) R
  2. DeviceID.Manufacturer - device manufacturer (e.g., Teltonika) R
  3. DeviceID.OUI - organizationally unique identifier of the device manufacture (e.g., 001E42) R
  4. DeviceID.ProductClass - product class (e.g., RUTXXX) R
  5. DeviceID.SerialNumber - device serial number R

Events information:

  1. Events.0_BOOTSTRAP - bootstrap time R
  2. Events.1_BOOT - boot time R
  3. Events.Inform - information time R
  4. Events.Registered - events reg time R