RUT361 Powering Options

From Teltonika Networks Wiki
Revision as of 16:04, 27 February 2024 by Vainius.l (talk | contribs) (Vainius.l moved page Draft:RUT361 Powering Options to RUT361 Powering Options without leaving a redirect)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > RUT Routers > RUT361 > RUT361 Manual > RUT361 Powering Options

This chapter contains information on powering options supported by RUT361 routers.

Power socket

The router has a 4 pin power socket and can be powered by a 9-30 VDC power supply unit (PSU). Refer to the image below for the power socket's pinout information:

Power socket pinout
No. Description Wire color
1 Power Red
2 Ground Black
3 Input Green
4 Output White
Trb142 power socket pinout v3.png

If you decide not to use the standard 9 VDC wall adapter and want to power the device from a higher voltage (15-30 VDC), please make sure that you choose a power supply of high quality. Some power supplies can produce voltage peaks significantly higher than the declared output voltage, especially during connection and disconnection.

While the device is designed to accept input voltage of up to 30 VDC peaks, high voltage power supplies can harm the device. If you want to use high voltage power supplies it is recommended to also use additional safety equipment to suppress voltage peaks from the power supply.