Summary
The Global Positioning System (GPS) is a space-based radionavigation system. This chapter is an overview of the GPS function in RUT850 routers.
GPSGPS Settings
File:Services gps configuration.PNG
field name |
value |
description |
Enable GPS service |
yes | no; Default: no |
Toggles GPS ON or OFF |
Enable GPS data to server |
yes | no; Default: no |
Enables automatic GPS data transferring to a remote server |
Remote host/IP address |
host | ip; Default: 212.47.99.61 |
Server IP address or domain name to send the coordinates to |
Port |
integer [0..65535]; Default: 17050 |
Server port used for data transfer |
Protocol |
TCP | UDP; Default: TCP |
Protocol to be used for data transfer to server |
TAVL Settings
field name |
value |
description |
Send GSM signal |
yes | no; Default: no |
Includes GSM signal strength information in GPS data package to be sent to server |
GPS Mode
File:Services gps gps mode.PNG
Data Sending Parameters
FIELD NAME
|
VALUE
|
DESCRIPTION
|
---|
Min period
|
integer [1..999999]; Default: 5
|
Period (in seconds) for data collection
|
---|
Min distance
|
integer [1..999999]; Default: 200
|
Distance difference (in meters) between last registered and current coordinates to collect data (even if Min period has not passed yet)
|
---|
Min angle
|
integer [1..999999]; Default: 30
|
Minimal angle difference between last registered and current coordinates to collect data (even if Min period has not passed yet)
|
---|
Min saved records
|
integer [1..32]; Default: 20
|
Minimal amount of coordinates registered to send them to server immediately (even if Send period has not passed yet)
|
---|
Send period
|
integer [1..999999]; Default: 60
|
Period for sending collected data to server
|
---|
The GPS configuration section allows to save several different configurations for GPS data collection. Active configuration is automaticaly selected when configured conditions are met.
GPS Configuration
FIELD NAME
|
VALUE
|
DESCRIPTION
|
---|
WAN
|
Mobile | Wired | WiFi; Default: Mobile
|
Interface which needs to be used to activate this configuration
|
---|
Type
|
Home | Roaming | Both; Default: Home
|
Mobile connection state needed to activate this configuration
|
---|
GPS Geofencing
Geofencing is a feature which can detect whenever a device enters or leaves customized area.
File:Services gps geofencing.PNG
FIELD NAME
|
VALUE
|
DESCRIPTION
|
---|
Enable
|
yes | no; Default: no
|
Toggles GPS Geofencing ON or OFF
|
---|
Longitude (X)
|
real number [-180..180]; Default: 0.000000
|
Longitude of selected point
|
---|
Latitude (Y)
|
real number [-90..90]; Default: 0.000000
|
Latitude of selected point
|
---|
Radius
|
integer [1..999999]; Default: 200
|
Radius of selected area
|
---|
Generate event on
|
Exit | Enter | Enter/Exit; Default: Exit
|
Specifies whether event takes place on exiting or entering the specified area or both
|
---|
Get current coordinates
|
-
|
Gets current device coordinates from GPS
|
---|
See also