31,703
edits
Changes
no edit summary
<tr>
<tr>
<td>Enable</td>
<td>Enable</td>
<td>yes {{!}} no; Default: '''no'''</td>
<td>yes | no; Default: '''no'''</td>
<td>Toggles QoS functionality ON or OFF</td>
<td>Toggles QoS functionality ON or OFF</td>
</tr>
</tr>
<tr>
<tr>
<td>Interface</td>
<td>Interface</td>
<td>WAN {{!}} LAN {{!}} PPP; Default: '''WAN'''</td>
<td>WAN | LAN | PPP; Default: '''WAN'''</td>
<td>Interface that the rule applies to</td>
<td>Interface that the rule applies to</td>
</tr>
</tr>
<tr>
<tr>
<td>Enable</td>
<td>Enable</td>
<td>yes {{!}} no; Default: '''no'''</td>
<td>yes | no; Default: '''no'''</td>
<td>Toggles the rule ON or OFF</td>
<td>Toggles the rule ON or OFF</td>
</tr>
</tr>
<tr>
<tr>
<td>Calculate overhead</td>
<td>Calculate overhead</td>
<td>yes {{!}} no; Default: '''no'''</td>
<td>yes | no; Default: '''no'''</td>
<td>Decreases upload and download ratio to prevent link saturation</td>
<td>Decreases upload and download ratio to prevent link saturation</td>
</tr>
</tr>
<tr>
<tr>
<td>Half-duplex</td>
<td>Half-duplex</td>
<td>es {{!}} no; Default: '''no'''</td>
<td>es | no; Default: '''no'''</td>
<td>Enables data transmission in both directions on a single carrier</td>
<td>Enables data transmission in both directions on a single carrier</td>
</tr>
</tr>
<tr>
<tr>
<td>Target</td>
<td>Target</td>
<td>Priority {{!}} Express {{!}} Normal {{!}} Low; Default: '''WAN'''</td>
<td>Priority | Express | Normal | Low; Default: '''WAN'''</td>
<td>Target for which the rule will be applied</td>
<td>Target for which the rule will be applied</td>
</tr>
</tr>
<tr>
<tr>
<td>Source host</td>
<td>Source host</td>
<td>All {{!}} ip; Default: '''All'''</td>
<td>All | ip; Default: '''All'''</td>
<td>Host from which data will be transmitted</td>
<td>Host from which data will be transmitted</td>
</tr>
</tr>
<tr>
<tr>
<td>Destination host</td>
<td>Destination host</td>
<td>All {{!}} ip; Default: '''All'''</td>
<td>All | ip; Default: '''All'''</td>
<td>Host to which data will be transmitted</td>
<td>Host to which data will be transmitted</td>
</tr>
</tr>
<tr>
<tr>
<td>Protocol</td>
<td>Protocol</td>
<td>All {{!}} TCP {{!}} UDP {{!}} ICMP {{!}} -- custom --; Default: '''All'''</td>
<td>All | TCP | UDP | ICMP | -- custom --; Default: '''All'''</td>
<td>Data transmission protocol</td>
<td>Data transmission protocol</td>
</tr>
</tr>
<tr>
<tr>
<td>Ports</td>
<td>Ports</td>
<td>All {{!}} integer [0..65535]; Default: '''22,53'''</td>
<td>All | integer [0..65535]; Default: '''22,53'''</td>
<td>Port(s) that will be used for transmission. You can enter multiple ports by separating them by commas (',')</td>
<td>Port(s) that will be used for transmission. You can enter multiple ports by separating them by commas (',')</td>
</tr>
</tr>
</tr>
</tr>
</table>
</table>
[[Category:RUT900 WebUI]]
