RUT900 VRRP
From Teltonika Networks Wiki
Summary
The Virtual Router Redundancy Protocol (VRRP) is a computer networking protocol that provides for automatic assignment of available Internet Protocol (IP) routers to participating hosts. This increases the availability and reliability of routing paths via automatic default gateway selections on an IP sub-network. This chapter is an overview of the VRRP function in RUT routers.
VRRP Configuration
| field name | value | description |
|---|---|---|
| Enable | yes | no; Default: no | Toggles VRRP ON or OFF |
| IP address | ip; Default: 192.168.1.253 | Virtual IP address for LAN's VRRP cluster |
| Virtual ID | integer [1..255]; Default: 1 | Routers with same IDs will be grouped in the same VRRP cluster |
| Priority | integer [1..255]; Default: 100 | The router with the highest priority value on the same VRRP cluster will act as a master |
You can find more information on configuring VRRP here
Check Internet Connection
| FIELD NAME | VALUE | DESCRIPTION |
|---|---|---|
| Enable | yes | no; Default: no | Toggles internet connection checking ON or OFF |
| Ping IP address | ip; Default: " " | A host to send ICMP packets to |
| Ping interval | integer; Default: 10 | Time interval between two Pings (in seconds |
| Ping timeout (sec) | integer [1..9999]; Default: 1 | Response timeout value |
| Ping packet size | integer [0..1000]; Default: " " | ICMP packet's size |
| Ping retry count | integer [1..9999]; Default: " " | Failed Ping attempt count before determining that the connection is lost |
