RUT950 CLI (legacy WebUI)

From Teltonika Networks Wiki
Revision as of 14:30, 19 July 2021 by Dziugas (talk | contribs) (Dziugas moved page Draft:RUT950 CLI (legacy WebUI) to RUT950 CLI (legacy WebUI) without leaving a redirect)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > RUT Routers > RUT950 > RUT950 Manual > RUT950 Legacy WebUI > RUT950 Services section (legacy) > RUT950 CLI (legacy WebUI)

The information in this page is updated in accordance with firmware version RUT9XX_R_00.06.09.5.

Note: this user manual page is for RUT950's old WebUI style available in earlier FW versions. Click here for information based on the latest FW version.

Summary

The CLI or Command Line Interface functionality allows you to enter and execute Linux commands within the router.

This chapter of the user manual provides an overview of the CLI page for RUT950 devices.

CLI

CLI is a console interface similar to the Linux Terminal program. Use the following credentials to log in:

  • Username: root
  • Password: router's password

If the login was successful, you should be greeted with a window like this:

Networking rut950 manual cli.png