RUT950 Port Mirroring
The information in this page is updated in accordance with firmware version RUT9_R_00.07.04.3.
Note: click here for the old style WebUI (FW version RUT9XX_R_00.06.09.5 and earlier) user manual page.
Port Mirroring is a service that relays a copy of all network packets (incoming and outgoing) on one Ethernet port (Source Port) to another (Monitoring Port). Port Mirroring enables packet monitoring. The service is applied widely, for example, network engineers can use it to analyze and debug data or diagnose errors, security teams can combine it with IDS to inspect traffic for threats on their networks without affecting the packet processing capabilities of the network devices.
This manual page provides an overview of the Port Mirroring page in RUT950 devices.
If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.
The General Settings section is used to set up the main Port Mirroring parameters. Refer to the table below for information on each configuration field.
|Monitoring port||LAN ports; default: disabled||Defines the port which will mirror the packets.|
|Source ports||LAN ports; default: none||Defines the ports whose packets will be mirrored.|