9,312
edits
Changes
no edit summary
| name = RUT951
| name = RUT951
| series = RUT9M
| series = RUT9M
}}
}}
==Changelog==
==Changelog==
===<b>[[Media:RUT9M_R_00.07.04.3_WEBUI.bin|RUT9M_R_00.07.04.3]]</b> | 2023.05.11===
* <b>Improvement</b>
** <b>System</b>
*** Optimized firmware image size
*** Removed SSH RSA key generation
*** Added SSH ECDSA key generation
* <b>Fix</b>
** <b>Network</b>
*** Fixed an issue with mobile when Call Utilities configuration is invalid
*** Fixed clients being unable to connect to wireless AP when multi AP configuration is empty
*** Fixed an issue where sometimes PIN/PUK code was deleted when performing a SIM switch
** <b>Services</b>
*** Fixed incorrect mobile data usage provided to RMS service
** <b>System</b>
*** Fixed an issue on bootloader web recovery hanging with certain firmware sizes
===<b>[[Media:RUT9M_R_00.07.04.2_WEBUI.bin|RUT9M_R_00.07.04.2]]</b> | 2023.04.18===
* <b>New</b>
** nftables support
* <b>Improvement</b>
** <b>Network</b>
*** Added PDP profile registry and LTE SMS format functions & management for the Verizon network
*** Improved SIM detection algorithm
*** Improved Multi-APN connection establishment time
** <b>WebUI</b>
*** Improved Overview page performance
** <b>System</b>
*** Changed hostname to router name
*** Updated OpenSSL to version 1.1.1t
*** Updated CA certificates to version 20211016
*** Updated libiwinfo to version 2022-08-19
* <b>Fix</b>
** <b>Network</b>
*** Fixed IPv4, IPv6 mobile connection restarts
*** Fixed operator scanning when mobile interface is disabled
*** Fixed data limit and tracking when software flow offloading is enabled
*** Added network reload call before bringing the mobile interface up
*** Fixed a segmentation fault issue which would occur occasionally when switching between SIM cards
*** Fixed Port-based VLAN ID calculation issue
*** Fixed PDP context authentication when using special characters
** <b>Services</b>
*** Fixed event text for configurable inputs/outputs on I/O Juggler
*** Fixed I/O PIN3 value not changing via MODBUS TCP
*** Added I/O status request error handling in various WebUI pages when the I/O service is booting up
*** Fixed wrong timezone returned issue in Operator Station Synchronization & Timezone Synchronization
*** Fixed MODBUS TCP Slave memory leak issue when requesting mobile parameters
*** Fixed OpenVPN enabling/disabling when using Password or TLS/Password authentication modes
*** Fixed OpenVPN keep alive setting migration issue
*** Fixed PPTP server name setting migration issue
*** Fixed missing WebUI issue caused by Email Relay installation
*** Fixed NTP's Operator Station Synchronization memory leak issue
*** Fixed test email validation
** <b>System</b>
*** Fixed libcares vulnerability CVE-2022-4904
*** Fixed frr vulnerability CVE-2022-37035
*** Removed ability for non root users to edit scripts that get executed as root
===<b>[[Media:RUT9M_R_00.07.04.1_WEBUI.bin|RUT9M_R_00.07.04.1]]</b> | 2023.03.24===
* <b>Fix</b>
** <b>Network</b>
*** Fixed Data Limit issue
===RUT9M_R_00.07.04_WEBUI.bin | 2023.03.07===
<b>Note:</b> Firmware version <b>RUT9M_R_00.07.04_WEBUI.bin</b> was removed from downloads list due to issues with Mobile Data Limit functionality not working correctly when Software offloading is enabled.
** <b>WebUI</b>
*** Improved data persistence between page refreshes
*** Improved page navigation behavior
*** Improved redirect logic to open configuration edit modals
*** Updated the 'Status -> Mobile' page
*** Updated interface card in the Overview page
*** Separated Sent and Received data bars on the chart in the Mobile Usage page
** <b>Network</b>
*** Added an info message displayed when a faulty SIM card is inserted
*** Added ResIOT operator's APNs to the APN database
*** Improved mobile connection re-establishment after reboot
*** Improved mobile connection recovery in cases where it was lost unexpectedly
*** Improved 'Deny data roaming' operation when switching between operators
*** Changed default WiFi AP cipher to CCMP (AES)
*** Added the logging of MAC addresses rejected by a WiFi AP
** <b>Services</b>
*** Added MQTT support to I/O Juggler
*** Added a frequency option 'schedule' Modbus Master
*** Added pagination to Events Reporting overview
*** Added limit to Events Reporting rule list
*** Added email logging for Events reporting
*** 'Sync with browser' button in the NTP page now also synchronizes the time zone
*** Added a limit of 30 for NTP instances
*** Made Networks selections in the 'Traffic Logging' page to display interface choices dynamically
*** Added "make before break" option to IPsec configuration
*** Added MODBUS TCP connection handling layer to MQTT-MODBUS Gateway
*** Improved MODBUS Master connection handling to reduce connection count
*** Updated modbus request error messages
*** Added OpenVPN server ip block support
*** Added MQTT support for MODBUS Master alarms
*** Added the possibility to get the device's Ethernet port data via SNMP
** <b>System</b>
*** Updated bash to version 5.1.16
*** Added detailed FW update failure error message to Events Log
*** Improved firmware upload/validation error messages
*** Updated Turkish language support
*** Added protocol column to IP block page
*** Added "vpns.log" file to the Troubleshoot package
*** Added Wireguard tunnel information to the Troubleshoot package
*** Updated default admin group access rights
*** Updated DFOTA notification to show "More info" only when the update is forced
* <b>Fix</b>
** <b>WebUI</b>
*** Fixed MAC address showing on mobile interfaces
*** Fixed mobile cell ID displaying in hexadecimal
*** Fixed mobile data limit card creation in the Overview page
*** Fixed modem widget disappearing from the Overview page
*** Fixed Services page not displaying data after Thingworx package is installed
** <b>Network</b>
*** Fixed interface priority change issue
*** Fixed a Custom Firewall Rule editing issue
*** Fixed DMZ configuration saving while it is disabled
*** Fixed Port Scan script execution failure
*** Fixed Firewall zone duplication issue
*** Fixed call function when VoLTE is disabled
*** Fixed VoLTE control when IMS is not enabled
*** Fixed mobile IPv6 IP checking when the device didn't get a correct IP address
*** Fixed APN authentication when using empty credentials
*** Fixed manual APN selection from list
*** Fixed disabled WiFi interface after factory reset
*** Fixed WiFi interface creation with SAE mixed encryption
*** Fixed PDP authentication not working on EC200A modems
** <b>Services</b>
*** Fixed I/O Scheduler overlapping instances issue
*** Fixed Input/Output image pin colors
*** Fixed issue that causes ADC subscribers to receive notifications for when ACL is active
*** Fixed WiFi Hotspot landing page uploaded theme image display
*** Fixed WiFi Hotspot trial user deletion issue
*** Fixed WiFi Hotspot service crash when associated WiFi interface is not up
*** Fixed WiFi Hotspot password request by SMS
*** Fixed WiFi Scanner starting process when the WiFi interface is disabled
*** Added limitations on message size and quantity of email messages in Email to SMS
*** Fixed SMTP HELLO value parsing issue
*** Fixed SMS message window reset button
*** Fixed not being able to save empty 'Message text' field in Auto Reply
*** Fixed multi-part SMS concatenation
*** Fixed multi-part SMS processing
*** Fixed SMS error message on 'Mobile Data Reset' action
*** Fixed Data To Server JSON format %n, %N and %s flag issues
*** Fixed Events Reporting email data clean
*** Fixed Events Reporting missing config selections
*** Fixed GRE Tunnel's 'Tunnel source' field validation when the source is custom
*** Fixed IPsec instance deletion after removing DMVPN package
*** Fixed IPSec migration via Backup file when DMVPN is configured
*** Fixed IPsec naming issue when the includes an equals sign
*** Fixed L2TP client to use correct interface on failover events
*** Fixed L2TP over IPsec connection dropping issue when connecting from a Windows client
*** Fixed MODBUS database size limiting issue
*** Fixed MODBUS MQTT Gateway client ID input
*** Fixed MODBUS TCP Slave RSSI value
*** Fixed MODBUS test button returning errors when several non-connected devices are configured
*** Fixed NTP Etc/GMT+1 and Etc/GMT-1 time zones
*** Fixed OpenVPN password validation when no CA certificate is uploaded or 'custom' template is selected
*** Fixed OpenVPN Static Key configuration saving by making Static key upload required
*** Fixed OpenVPN TLS client creation issue while LAN is down
*** Fixed Package Manager displaying non-existent packages
*** Fixed Package Manager errors showing up after successful installations
*** Fixed Periodic Reboot entry duplication after a power cycle
*** Fixed PPTP 'Client to client' option not being applied after save
*** Fixed receiving excessive device state emails after a reboot is initialized over RMS
*** Fixed WebUI unavailability after unsuccessful package install
** <b>System</b>
*** Fixed vulnerabilities CVE-2022-3524, CVE-2022-3566, CVE-2022-3567, CVE-2022-39188, CVE-2022-45934, CVE-2022-47929
*** Fixed bash vulnerability CVE-2022-3715
*** Fixed CGI-IO file download vulnerability CVE-2022-38333
*** Fixed libxml2 vulnerability CVE-2022-40304
*** Fixed libcurl vulnerabilities CVE-2022-43551 and CVE-2022-43552
*** Fixed firmware version display
*** Improved file upload logic
*** Fixed GPL firmware compilation with selected Tinc package
*** Fixed OpenVPN Static Key migration via keep settings issue
*** Fixed NTP time zone name setting migration when the name contains whitespaces
*** Fixed language setting issue
*** Fixed integer validation on industrial services
*** Fixed LED indications when PDP type is IPv6
*** Fixed issues with PDP type and SMS limit period migration via keep settings
===<b>[[Media:RUT9M_R_00.07.03.4_WEBUI.bin|RUT9M_R_00.07.03.4]]</b> | 2023.02.09===
* <b>Fix</b>
** <b>Network</b>
*** Changed generic modem restart method
*** Fixed mobile page VoLTE switching issues
*** Fixed CVE-2023-32349 vulnerability
** <b>Services</b>
*** Sanitized tcpdump storage location
===<b>[[Media:RUT9M_R_00.07.03.3_WEBUI.bin|RUT9M_R_00.07.03.3]]</b> | 2023.01.25===
* <b>Fix</b>
** <b>Network</b>
*** Fixed disabled WiFi interface after factory reset
===<b>[[Media:RUT9M_R_00.07.03.2_WEBUI.bin|RUT9M_R_00.07.03.2]]</b> | 2023.01.13===
* <b>New</b>
** <b>System</b>
*** Japanese language
* <b>Improvements</b>
** <b>Network</b>
*** Optimized mobile netifd script installation
* <b>Fix</b>
** <b>Network</b>
*** Shortened modem hang monitor timeout
*** Fixed VLAN option setting when changing VLAN ID
===<b>[[Media:RUT9M_R_00.07.03.1_WEBUI.bin|RUT9M_R_00.07.03.1]]</b> | 2023.01.03===
* <b>Improvements</b>
** <b>System</b>
*** Remove front-end certificate validation
** <b>Network</b>
*** Optimized mobile netifd script installation
* <b>Fix</b>
** <b>Network</b>
*** Fixed modem communication validation
*** Fixed connection establishment in IPv6 only mode
** <b>Services</b>
*** Fixed libxml2 vulnerability CVE-2022-40303
*** Fixed an IPsec Phase one & two setting migration issue
** <b>System</b>
*** Fixed JSON key parsing; keys can now be any printable character sequence
*** Fixed memory leak in 'session' module
** <b>WebUI</b>
*** Fixed file pretty name parsing
===<b>[[Media:RUT9M_R_00.07.03_WEBUI.bin|RUT9M_R_00.07.03]]</b> | 2022.12.16===
===<b>[[Media:RUT9M_R_00.07.03_WEBUI.bin|RUT9M_R_00.07.03]]</b> | 2022.12.16===
* <b>Fix</b>
* <b>Fix</b>
** <b>Network</b>
** <b>Network</b>
*** Fixed CVE-2023-32350 vulnerability
*** Fixed jumbo frames MTU issue
*** Fixed jumbo frames MTU issue
*** Added the 'Any' choice to source & destination IP address field in NAT rule edit
*** Added the 'Any' choice to source & destination IP address field in NAT rule edit
