31,703
edits
Changes
RUT955 Relay to Open Collector Output (view source)
Revision as of 13:14, 12 June 2020
, 13:14, 12 June 2020Created page with "This section provides an example on how to connect a relay to RUT955 open collector output: File:Connecting relay to open collector output rut955.png '''Note:''' some re..."
This section provides an example on how to connect a relay to RUT955 open collector output:
[[File:Connecting relay to open collector output rut955.png]]
'''Note:''' some relays have internal protection diode D. When connecting such relay you mustn’t mix up coil contacts. If you mix up such relay coil contacts you might cause permanent damage to the open collector output.
For more information about digital output control and RUT955 Inputs/Outputs in general refer '''[[RUT955 Input/Output|here]]'''
[[Category:RUT955 Hardware Application Examples]]
[[File:Connecting relay to open collector output rut955.png]]
'''Note:''' some relays have internal protection diode D. When connecting such relay you mustn’t mix up coil contacts. If you mix up such relay coil contacts you might cause permanent damage to the open collector output.
For more information about digital output control and RUT955 Inputs/Outputs in general refer '''[[RUT955 Input/Output|here]]'''
[[Category:RUT955 Hardware Application Examples]]