538
edits
Changes
→SNMP Configuration
<td>v1/v2 | v1/v2/v3 | v3; Default: '''v1/v2'''</td>
<td>v1/v2 | v1/v2/v3 | v3; Default: '''v1/v2'''</td>
<td>Specifies which SNMP version is to be used</td>
<td>Specifies which SNMP version is to be used</td>
</tr>
<tr>
<td><span style="color: red;">v1/v2/v3</span>/<span style="color: purple;">v3:</span> Username</td>
<td>string; Default: '''username'''</td>
<td>Set username to access SNMP</td>
</tr>
<tr>
<td><span style="color: red;">v1/v2/v3</span>/<span style="color: purple;">v3:</span> Authentication type</td>
<td>SHA | MD5; Default: '''SHA'''</td>
<td>Set authentication passphrase to generate key for SNMPv3</td>
</tr>
<tr>
<td><span style="color: red;">v1/v2/v3</span>/<span style="color: purple;">v3:</span> Authentication passphrase</td>
<td>string; Default: '''passphrase'''</td>
<td>Set authentication passphrase to generate key for SNMPv3</td>
</tr>
<tr>
<td><span style="color: red;">v1/v2/v3</span>/<span style="color: purple;">v3:</span> Encryption type</td>
<td>AES | DES; Default: '''AES'''</td>
<td>Set encryption type to use with SNMPv3</td>
</tr>
<tr>
<td><span style="color: red;">v1/v2/v3</span>/<span style="color: purple;">v3:</span> Encryption passphrase </td>
<td>string; Default: '''passphrase'''</td>
<td>Set encryption passphrase to generate key for SNMPv3</td>
</tr>
</tr>
</table>
</table>
<b>Additional notes</b>:
<ul>
<li>Some configuration fields become available only when certain other parameters are selected. The names of the parameters are followed by a prefix that specifies the authentication type under which they become visible. Different color codes are used for different prefixes:
<ul>
<li>Red for <span style="color: red;">SNMP version: v1/v2/v3</span></li>
<li>Purple for <span style="color: purple;">SNMP version: v3</span></li>
</ul>
</li>
<li>After changing any of the parameters, don't forget to click the <b>Save</b> button located at the bottom-right side of the page.</li>
</ul>
==Trap Settings==
==Trap Settings==
