Changes

RUTX12 Traffic control with Firewall WANzone Splitting (view source)

Revision as of 08:49, 12 September 2023

511 bytes removed ,  08:49, 12 September 2023
no edit summary
Line 15: Line 15:  
* Access the router through WEBUI, go to <b>Network -> Interfaces</b>, and make sure that one or the other mobile interference is running MOB1S1A1 or MOB2S1A1 (Status = Running). You should be able to see the IP address assigned to it. In addition, it is recommended to perform connectivity checking by using the ping utility.
 
* Access the router through WEBUI, go to <b>Network -> Interfaces</b>, and make sure that one or the other mobile interference is running MOB1S1A1 or MOB2S1A1 (Status = Running). You should be able to see the IP address assigned to it. In addition, it is recommended to perform connectivity checking by using the ping utility.
 
* Make sure that you have ADVANCED mode enabled. This will allow you to choose from a larger variety of settings.
 
* Make sure that you have ADVANCED mode enabled. This will allow you to choose from a larger variety of settings.
−
  −
== Firewall ==
  −
A '''Firewall''' is a network security software that is designed to monitor, filter, and control incoming and outgoing network traffic based on predetermined security rules. Its primary purpose is to establish a barrier between a trusted internal network and untrusted external networks, such as the internet. Firewalls play a crucial role in enhancing the security of computer networks by regulating the flow of data and protecting against unauthorized access, cyberattacks, and data breaches.
      
== Configuration ==
 
== Configuration ==
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/111364"

Navigation menu