0
edits
Changes
SNMP configuration example (view source)
Revision as of 12:52, 11 September 2019
, 12:52, 11 September 2019no edit summary
Traps are alert messages sent by SNMP agent to SNMP manager.
Traps are alert messages sent by SNMP agent to SNMP manager.
SNMP agent - Teltonika router. Device which sends Trap messages to the manager.
'''SNMP agent''' - Teltonika router. Device which sends Trap messages to the manager.
SNMP manager - device which listens for Trap messages from the agents.
'''SNMP manager''' - device which listens for Trap messages from the agents.
Teltonika routers are able to send SNMP Trap messages to the manager on their own when they experience a problem or a situation described in the rules.
Teltonika routers are able to send SNMP Trap messages to the manager on their own when they experience a problem or a situation described in the rules.
All that is left, is to add the numbers together. Example from given MIB File: 1.3.6.1.4.1.48690.1.1.0.
All that is left, is to add the numbers together. Example from given MIB File: 1.3.6.1.4.1.48690.1.1.0.
'''Important note:''' Do not forget to add .0 at the end of the generated OID code.
'''Important note:''' Do not forget to add .0 at the end of the generated OID code, except to Trap OID codes. Trap OID codes are only used by SNMP agent (router), using them in MIB browser or command line will not give any results.
==SNMP Configuration==
==SNMP Configuration==