Changes

This article provides a guide on how to separate mobile data traffic by using first SIM card for LAN traffic and second SIM card for WLAN traffic. These configurations are specifically made for RUTX12.

This article provides a guide on how to separate mobile data traffic by using first SIM card for LAN traffic and second SIM card for WLAN traffic. These configurations are specifically made for RUTX12.

 

----

----

* First you want to make sure that you have '''ADVANCED mode''' enabled. This will allow you to choose from a larger variety of settings.

* First you want to make sure that you have '''ADVANCED mode''' enabled. This will allow you to choose from a larger variety of settings.

[[File:Networking rutx manual webui basic advanced mode v1.gif|border|class=tlt-border]]

[[File:Networking rutx manual webui basic advanced mode v1.gif|border|class=tlt-border]]

----

----

* Go to '''Network''' → '''VLAN'''

* Go to '''Network''' → '''VLAN'''

* Click '''Add'''

* Click '''Add'''

* Leave VLAN ID as it is, for now, no need to change anything here

* Leave VLAN ID as it is, for now, no need to change anything here

* Go to '''Network''' → '''Interfaces'''

* Go to '''Network''' → '''Interfaces'''

* Under '''Add New Instance''' enter the name for your new LAN interface (we are going to use "lan2" for this example) and click '''Add'''

* Under '''Add New Instance''' enter the name for your new LAN interface (we are going to use "lan2" for this example) and click '''Add'''

[[File:Phy eth3.png]]

[[File:Phy eth3.png]]

* Go to '''Network''' → '''Routing''' → '''Advanced Static Routes'''

* Go to '''Network''' → '''Routing''' → '''Advanced Static Routes'''

[[File:Rules 2.png]]

[[File:Rules 2.png]]

* Go to '''Network''' → '''VLAN'''

* Go to '''Network''' → '''VLAN'''

[[File:Vlan end.png]]

[[File:Vlan end.png]]

* Go to '''Network''' → '''Wireless'''

* Go to '''Network''' → '''Wireless'''