Difference between revisions of "Serial Interface Control Commands"

From Teltonika Networks Wiki
(Created page with "__TOC__ === Serial Interface Control Commands === ---- The command controls the behavior of the UE‟s DCD (data carrier detection) line. [https://wiki.teltonika.lt/wiki...")
 
Line 1: Line 1:
 
__TOC__
 
__TOC__
  
=== Serial  Interface  Control  Commands ===
+
== Serial  Interface  Control  Commands ==
 
----
 
----
 
The command controls the behavior of the UE‟s DCD (data carrier detection) line.  
 
The command controls the behavior of the UE‟s DCD (data carrier detection) line.  
  
 
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=32 '''3.1. AT&C    Set DCD Function Mode - page 31''']
 
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=32 '''3.1. AT&C    Set DCD Function Mode - page 31''']

Revision as of 09:40, 22 November 2019

TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > Serial Interface Control Commands

Serial Interface Control Commands


The command controls the behavior of the UE‟s DCD (data carrier detection) line.

3.1. AT&C Set DCD Function Mode - page 31