Difference between revisions of "Serial Interface Control Commands"

From Teltonika Networks Wiki
(4 intermediate revisions by one other user not shown)
Line 2: Line 2:
  
 
== Serial  Interface  Control  Commands ==
 
== Serial  Interface  Control  Commands ==
 +
 +
 +
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=32 '''3.1. AT&C    Set DCD Function Mode - page 31''']
  
 
The command controls the behavior of the UE‟s DCD (data carrier detection) line.  
 
The command controls the behavior of the UE‟s DCD (data carrier detection) line.  
  
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=32 '''3.1. AT&C   Set DCD Function Mode - page 31''']
+
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=32 '''3.2. AT&D   Set DTR Function Mode - page 31''']
  
 
The commanddetermines how the UE responds if DTR line is changed from lowto highlevelduring data mode.
 
The commanddetermines how the UE responds if DTR line is changed from lowto highlevelduring data mode.
  
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=32 '''3.2. AT&D   Set DTR Function Mode - page 31''']
+
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=33 '''3.3. AT+IFC Set TE-TA Local Data Flow Control - page 32''']
 +
 
 +
The command determines the flow control behavior of the serial port.
 +
 
 +
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=34 '''3.4. AT+IFC Set TE-TA Local Data Flow Control - page 33''']
 +
 
 +
The command determines the serial interface character framing format and parity received by TA from TE.
 +
 
 +
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=35 '''3.5.AT+IPR    Set TE-TA Fixed Local Rate - page 34''']
 +
 
 +
The commandis used to query and set the baud rate of the UART. The default baud rate value (<rate>) is 115200bps. The setting of <rate>will not be restored with AT&F.
 +
 
 +
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=36 '''3.6.AT+QRIR   Restore RI Behaviorto Inactive - page 35''']
 +
 
 +
If the RI (ring indicator) behavior is "always",it can be restored to inactive by the Execution Command. The RI behavior    is controlled by AT+QCFG. Please refer to AT+QCFG="urc/ri/ring", AT+QCFG="urc/ri/sms incoming"and AT+QCFG="urc/ri/other"for more details.
 +
 
 +
[[Category:TRM240 AT Commands]]

Revision as of 14:59, 18 June 2020

TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > Serial Interface Control Commands

Serial Interface Control Commands

3.1. AT&C Set DCD Function Mode - page 31

The command controls the behavior of the UE‟s DCD (data carrier detection) line.

3.2. AT&D Set DTR Function Mode - page 31

The commanddetermines how the UE responds if DTR line is changed from lowto highlevelduring data mode.

3.3. AT+IFC Set TE-TA Local Data Flow Control - page 32

The command determines the flow control behavior of the serial port.

3.4. AT+IFC Set TE-TA Local Data Flow Control - page 33

The command determines the serial interface character framing format and parity received by TA from TE.

3.5.AT+IPR Set TE-TA Fixed Local Rate - page 34

The commandis used to query and set the baud rate of the UART. The default baud rate value (<rate>) is 115200bps. The setting of <rate>will not be restored with AT&F.

3.6.AT+QRIR Restore RI Behaviorto Inactive - page 35

If the RI (ring indicator) behavior is "always",it can be restored to inactive by the Execution Command. The RI behavior is controlled by AT+QCFG. Please refer to AT+QCFG="urc/ri/ring", AT+QCFG="urc/ri/sms incoming"and AT+QCFG="urc/ri/other"for more details.