Difference between revisions of "Serial Interface Control Commands"

From Teltonika Networks Wiki
Line 6: Line 6:
  
 
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=32 '''3.1. AT&C    Set DCD Function Mode - page 31''']
 
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=32 '''3.1. AT&C    Set DCD Function Mode - page 31''']
 +
 +
The commanddetermines how the UE responds if DTR line is changed from lowto highlevelduring data mode.
 +
 +
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=32 '''3.2. AT&D    Set DTR Function Mode - page 31''']

Revision as of 09:58, 22 November 2019

TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > Serial Interface Control Commands

Serial Interface Control Commands

The command controls the behavior of the UE‟s DCD (data carrier detection) line.

3.1. AT&C Set DCD Function Mode - page 31

The commanddetermines how the UE responds if DTR line is changed from lowto highlevelduring data mode.

3.2. AT&D Set DTR Function Mode - page 31