Difference between revisions of "Serial Interface Control Commands"
From Teltonika Networks Wiki
| Line 1: | Line 1: | ||
== Serial Interface Control Commands == | == Serial Interface Control Commands == | ||
| − | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=33&zoom=100,68,232 AT&C Set DCD Function Mode]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=33&zoom=100,68,232 AT&C Set DCD Function Mode]=== |
| − | + | ---- | |
The command controls the behavior of the UE‟s DCD (data carrier detection) line. | The command controls the behavior of the UE‟s DCD (data carrier detection) line. | ||
| − | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=33&zoom=100,68,700 AT&D Set DTR Function Mode]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=33&zoom=100,68,700 AT&D Set DTR Function Mode]=== |
| − | + | ---- | |
The commanddetermines how the UE responds if DTR line is changed from lowto highlevelduring data mode. | The commanddetermines how the UE responds if DTR line is changed from lowto highlevelduring data mode. | ||
| − | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=34&zoom=100,68,320 AT+IFC Set TE-TA Local Data Flow Control]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=34&zoom=100,68,320 AT+IFC Set TE-TA Local Data Flow Control]=== |
| − | + | ---- | |
The command determines the flow control behavior of the serial port. | The command determines the flow control behavior of the serial port. | ||
| − | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=35&zoom=100,68,388 AT+IFC Set TE-TA Local Data Flow Control]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=35&zoom=100,68,388 AT+IFC Set TE-TA Local Data Flow Control]=== |
| − | + | ---- | |
The command determines the serial interface character framing format and parity received by TA from TE. | The command determines the serial interface character framing format and parity received by TA from TE. | ||
| − | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=36&zoom=100,68,273 AT+IPR Set TE-TA Fixed Local Rate]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=36&zoom=100,68,273 AT+IPR Set TE-TA Fixed Local Rate]=== |
| − | + | ---- | |
The commandis used to query and set the baud rate of the UART. The default baud rate value ('''<rate>''') is 115200bps. The setting of '''<rate>''' will not be restored with '''AT&F'''. | The commandis used to query and set the baud rate of the UART. The default baud rate value ('''<rate>''') is 115200bps. The setting of '''<rate>''' will not be restored with '''AT&F'''. | ||
| − | ==[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=37&zoom=100,68,729 AT+QRIR Restore RI Behaviorto Inactive]== | + | ===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=37&zoom=100,68,729 AT+QRIR Restore RI Behaviorto Inactive]=== |
| − | + | ---- | |
If the RI (ring indicator) behavior is "always",it can be restored to inactive by the Execution Command. The RI behavior is controlled by '''AT+QCFG'''. Please refer to '''AT+QCFG="urc/ri/ring'''", '''AT+QCFG="urc/ri/sms incoming'''"and '''AT+QCFG="urc/ri/other'''"for more details. | If the RI (ring indicator) behavior is "always",it can be restored to inactive by the Execution Command. The RI behavior is controlled by '''AT+QCFG'''. Please refer to '''AT+QCFG="urc/ri/ring'''", '''AT+QCFG="urc/ri/sms incoming'''"and '''AT+QCFG="urc/ri/other'''"for more details. | ||
[[Category:TRM240 AT Commands]] | [[Category:TRM240 AT Commands]] | ||
Revision as of 09:57, 2 March 2023
TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > Serial Interface Control CommandsSerial Interface Control Commands
AT&C Set DCD Function Mode
The command controls the behavior of the UE‟s DCD (data carrier detection) line.
AT&D Set DTR Function Mode
The commanddetermines how the UE responds if DTR line is changed from lowto highlevelduring data mode.
AT+IFC Set TE-TA Local Data Flow Control
The command determines the flow control behavior of the serial port.
AT+IFC Set TE-TA Local Data Flow Control
The command determines the serial interface character framing format and parity received by TA from TE.
AT+IPR Set TE-TA Fixed Local Rate
The commandis used to query and set the baud rate of the UART. The default baud rate value (<rate>) is 115200bps. The setting of <rate> will not be restored with AT&F.
AT+QRIR Restore RI Behaviorto Inactive
If the RI (ring indicator) behavior is "always",it can be restored to inactive by the Execution Command. The RI behavior is controlled by AT+QCFG. Please refer to AT+QCFG="urc/ri/ring", AT+QCFG="urc/ri/sms incoming"and AT+QCFG="urc/ri/other"for more details.
