9,561
edits
Changes
Setting up a GRE over IPsec tunnel between RUTOS devices (view source)
Revision as of 12:24, 15 December 2021
, 12:24, 15 December 2021no edit summary
<li><b>Enabled</b> - ON.</li>
<li><b>Enabled</b> - ON.</li>
<li><b>Tunnel source</b> - select the network interface with Public IP which is used to establish GRE tunnel.</li>
<li><b>Tunnel source</b> - select the network interface with Public IP which is used to establish GRE tunnel.</li>
<li><b>Remote endpoint IP address</b> - Public IP address of remote (<i>Router 1</i>) device.</li>
<li><b>Remote endpoint IP address</b> - Public IP address of remote (<i>Router 2</i>) device.</li>
<li><b>MTU</b> - 1476</li>
<li><b>MTU</b> - 1476</li>
<li><b>Outbound key</b> - 12345 (must match other device's Inbound key)</li>
<li><b>Outbound key</b> - 12345 (must match other device's Inbound key)</li>
<li><b>Enabled</b> - ON.</li>
<li><b>Enabled</b> - ON.</li>
<li><b>Tunnel source</b> - select the network interface with Public IP which is used to establish GRE tunnel.</li>
<li><b>Tunnel source</b> - select the network interface with Public IP which is used to establish GRE tunnel.</li>
<li><b>Remote endpoint IP address</b> - Public IP address of remote (<i>Router 2</i>) device.</li>
<li><b>Remote endpoint IP address</b> - Public IP address of remote (<i>Router 1</i>) device.</li>
<li><b>MTU</b> - 1476</li>
<li><b>MTU</b> - 1476</li>
<li><b>Outbound key</b> - 12345 (must match other device's Inbound key)</li>
<li><b>Outbound key</b> - 12345 (must match other device's Inbound key)</li>