226
edits
Changes
Setting up external Radius server for Hotspot authentication (view source)
Revision as of 15:01, 28 October 2022
, 15:01, 28 October 2022no edit summary
*Ports 1812 and 1813 forwarding to local Ubuntu server
*Ports 1812 and 1813 forwarding to local Ubuntu server
Firstly, let us set a static lease for the Ubuntu machine running Radius server:
Firstly, let us set a static lease for the Ubuntu machine running Radius server and configure port forwarding:
* Login to WebUI and navigate to Network → Interfaces → LAN and add a static lease to the MAC address of Ubuntu machine.
* Login to WebUI and navigate to Network → Interfaces → LAN and add a static lease to the MAC address of Ubuntu machine.
* Navigate to Network → Firewall → Port Forwards and add two new rules to forward 1812 and 1813 ports from WAN to Radius server on the same ports.
* Navigate to Network → Firewall → Port Forwards and add two new rules to forward 1812 and 1813 ports from WAN to Radius server on the same ports.
==Preparing RUT2==
==Preparing RUT2==
====Setting up Hotspot====
----
Main requirements for RUT2:
*Internet connection
*Hotspot service
In order to start our Hotspot, we need to create a Wifi access point without a dedicated interface nor with any authentication:
* Navigate to Network → Wireless and click add
* Select "--No network--" in General setup → Network
* Select "No encryption" in Wireless security → Encryption
* Save & Apply
* Navigate to Services → Hotspot (Or install the package if it is not present by navigating to Services → Package Manager)
*
