Difference between revisions of "Status Control Commands"

From Teltonika Networks Wiki
 
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
−
__TOC__
 
−
 
 
== Status  Control  Commands ==
 
== Status  Control  Commands ==
  
−
 
+
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=39&zoom=100,68,232 AT+CPAS Mobile Equipment Activity Status]===
−
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=38 '''4.1. AT+CPAS   Mobile Equipment Activity Status - page 37''']
+
----
−
 
 
 
TheExecutionCommand queries the module‟s activity status.
 
TheExecutionCommand queries the module‟s activity status.
  
−
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=39 '''4.2. AT+CEER   Extended Error Report - page 38''']
+
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=40&zoom=100,68,470 AT+CEER Extended Error Report]===
−
 
+
----
 
The commandis used to query an extended error and report the cause of the last failed operation, such as:
 
The commandis used to query an extended error and report the cause of the last failed operation, such as:
 
* the failure to release a call;
 
* the failure to release a call;
Line 17: Line 14:
 
* the failureto attach GPRS or the failureto activatea PDP context;
 
* the failureto attach GPRS or the failureto activatea PDP context;
 
* the failureto detach GPRS or the failureto deactivate a PDP context.
 
* the failureto detach GPRS or the failureto deactivate a PDP context.
−
The release cause <text> is a text to describe the cause information given by the network.
 
  
−
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=40 '''4.3. AT+QCFG  Extended Configuration Settings - page 39''']
+
The release cause '''<text>''' is a text to describe the cause information given by the network.
  
 +
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=41&zoom=100,68,346 AT+QCFG Extended Configuration Settings]===
 +
----
 
The command is used to query and configure various settings of UE.
 
The command is used to query and configure various settings of UE.
  
−
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=41 '''4.3.1. AT+QCFG="gprsattach"   GPRS Attach Mode Configuration - page 40''']
+
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=42&zoom=100,68,684 AT+QCFG="gprsattach" GPRS Attach Mode Configuration]===
−
 
+
----
 
The  command specifies  the  mode  to  attach GPRS when  UE  is  powered  on.  This  configuration  is  valid only after the module is restarted.
 
The  command specifies  the  mode  to  attach GPRS when  UE  is  powered  on.  This  configuration  is  valid only after the module is restarted.
  
−
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=42 '''4.3.2. AT+QCFG="nwscanmode"   Network Search Mode Configuration - page 41''']
+
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=43&zoom=100,68,370 AT+QCFG="nwscanmode" Network Search Mode Configuration]===
−
 
+
----
−
The  commands pecifies  the network  mode  to  be  serached.  If <effect>is  omitted,  the  configuration  will take effect immediately.
+
The  commands pecifies  the network  mode  to  be  serached.  If '''<effect>''' is  omitted,  the  configuration  will take effect immediately.
−
 
 
−
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=43 '''4.3.3. AT+QCFG="nwscanseq"    Network Searching Sequence Configuration - page 42''']
 
  
 +
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=44&zoom=100,68,285 AT+QCFG="nwscanseq" Network Searching Sequence Configuration]===
 +
----
 
The  command specifies  the  sequence  of  searching  network. This  configuration  is  valid  only  after  the module is restarted.
 
The  command specifies  the  sequence  of  searching  network. This  configuration  is  valid  only  after  the module is restarted.
  
−
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=44 '''4.3.4. AT+QCFG="roamservice"   Roam Service Configuration - page 43''']
+
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=45&zoom=100,68,97 AT+QCFG="roamservice" Roam Service Configuration]===
−
 
+
----
−
The command is used to enable or disable the roam service. If <effect>is omitted, the configuration will take effect immediately.
+
The command is used to enable or disable the roam service. If '''<effect>''' is omitted, the configuration will take effect immediately.
−
 
 
−
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=44 '''4.3.5. AT+QCFG="servicedomain"    Service Domain Configuration - page 43''']
 
−
 
 
−
The command specifies the registered service domain. If <effect>is omitted, the configuration will take effect immediately.
 
  
−
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=45 '''4.3.6. AT+QCFG="band"   Band Configuration - page 44''']
+
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=45&zoom=100,68,808 AT+QCFG="servicedomain" Service Domain Configuration]===
 +
----
 +
The command specifies the registered service domain. If '''<effect>''' is omitted, the configuration will take effect immediately.
  
−
The command specifies the preferred frequency bands to be searched of UE. If <effect>is omitted, the configuration will take effect immediately.
+
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=46&zoom=100,68,598 AT+QCFG="band" Band Configuration]===
−
 
+
----
−
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=47 '''4.3.7. AT+QCFG="hsdpacat"   HSDPA Category Configuration - page 46''']
+
The command specifies the preferred frequency bands to be searched of UE. If '''<effect>''' is omitted, the configuration will take effect immediately.
  
 +
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=48&zoom=100,68,156 AT+QCFG="hsdpacat" HSDPA Category Configuration]===
 +
----
 
The command specifies the HSDPA category. This configuration is valid only after the module is restarted.
 
The command specifies the HSDPA category. This configuration is valid only after the module is restarted.
  
−
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=47 '''4.3.8. AT+QCFG="hsupacat"   HSUPA Category Configuration - page 46''']
+
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=48&zoom=100,68,834 AT+QCFG="hsupacat" HSUPA Category Configuration]===
−
 
+
----
 
The command specifies the HSUPA category. This configuration is valid only after the module is restarted.
 
The command specifies the HSUPA category. This configuration is valid only after the module is restarted.
  
−
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=48 '''4.3.9. AT+QCFG="rrc"   RRC Release Version Configuration - page 47''']
+
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=49&zoom=100,68,474 AT+QCFG="rrc" RRC Release Version Configuration]===
−
 
+
----
 
The  command specifies  the  RRC  release  version.  This  configuration  is  valid  only  after  the  module  is restarted.
 
The  command specifies  the  RRC  release  version.  This  configuration  is  valid  only  after  the  module  is restarted.
  
−
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=49 '''4.3.10. AT+QCFG="sgsn"   UE SGSN Release Version Configuration - page 48''']
+
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=50&zoom=100,68,202 AT+QCFG="sgsn" UE SGSN Release Version Configuration]===
−
 
+
----
 
The command specifies the UE SGSN release version. This configuration is valid only after the module is restarted.
 
The command specifies the UE SGSN release version. This configuration is valid only after the module is restarted.
  
−
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=49 '''4.3.11. AT+QCFG="msc"   UE MSC Release Version Configuration - page 48''']
+
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=50&zoom=100,68,817 AT+QCFG="msc" UE MSC Release Version Configuration]===
−
 
+
----
 
The commandspecifies the UE MSCrelease version. This configuration is valid only after the module is restarted.
 
The commandspecifies the UE MSCrelease version. This configuration is valid only after the module is restarted.
  
−
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=50 '''4.3.12. AT+QCFG="PDP/duplicatechk"Establish Multi PDNs with the Same APN - page 49''']
+
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=51&zoom=100,68,496 AT+QCFG="PDP/duplicatechk"Establish Multi PDNs with the Same APN]===
−
 
+
----
 
The command allows/refuses establishing multi PDNs with the same APN profile. The configuration will take effect immediately.
 
The command allows/refuses establishing multi PDNs with the same APN profile. The configuration will take effect immediately.
  
−
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=51 '''4.3.13. AT+QCFG="urc/ri/ring"   RI Behavior When RING URC is Presented - page 50''']
+
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=52&zoom=100,68,201 AT+QCFG="urc/ri/ring" RI Behavior When RING URC is Presented]===
 +
----
 +
'''AT+QCFG="urc/ri/ring"''', '''AT+QCFG="urc/ri/smsincoming"''' and '''AT+QCFG="urc/ri/other"control''' the RI  (ring  indicator)  behavior  when  a  URC  is  reported. These  configurations  will  be  stored  into  NV automatically. The  ring  indicator  is  active  low. '''AT+QCFG="urc/ri/ring"''' specifies  the  RI behavior  when URC '''RING''' is presented to indicate an incoming call.
  
−
AT+QCFG="urc/ri/ring", AT+QCFG="urc/ri/smsincoming" and AT+QCFG="urc/ri/other"control  the RI  (ring  indicator)  behavior  when a URC  is  reported.  These  configurations  will  be  stored  into  NV automatically.  The  ring  indicator  is  active  low. AT+QCFG="urc/ri/ring" specifies  the  RI  behavior  when URC RING is presented to indicate an incoming call.
+
The sum of parameter '''<activeduration>''' and '''<inactiveduration>''' determines the interval time of “RING”
 +
indications when a call is coming.
  
−
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=53 '''4.3.14. AT+QCFG="urc/ri/smsincoming"   RIBehavior WhenIncoming SMSURCs are Presented - page 52''']
+
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=54&zoom=100,68,97 AT+QCFG="urc/ri/smsincoming" RIBehavior WhenIncoming SMSURCs are Presented]===
−
 
+
----
−
The  command specifies the RI  (ring  indicator) behavior  when  related  incoming  message  URCs  are presented. Related incoming message URCs list: +CMTI,+CMT,+CDSand+CBM.
+
The  command specifies the RI  (ring  indicator) behavior  when  related  incoming  message  URCs  are presented. Related incoming message URCs list: '''+CMTI''','''+CMT''','''+CDS''' and '''+CBM'''.
−
 
 
−
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=54 '''4.3.15. AT+QCFG="urc/ri/other"    RI Behavior When Other URCsare Presented - page 53''']
 
  
 +
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=55&zoom=100,68,97 AT+QCFG="urc/ri/other" RI Behavior When Other URCsare Presented]===
 +
----
 
The command specifies the RI (ring indicator)behavior when other URCs are presented.
 
The command specifies the RI (ring indicator)behavior when other URCs are presented.
  
−
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=54 '''4.3.16. AT+QCFG="risignaltype"   RISignal Output Carrier - page 53''']
+
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=55&zoom=100,68,810 AT+QCFG="risignaltype" RISignal Output Carrier]===
−
 
+
----
 
The command specifies the RI (ring indicator) signal output carrier.
 
The command specifies the RI (ring indicator) signal output carrier.
  
−
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=55 '''4.3.17. AT+QCFG="urc/delay"Delay URC Indication - page 54''']
+
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=56&zoom=100,68,640 AT+QCFG="urc/delay"Delay URC Indication]===
−
 
+
----
 
The commandcan delay the output ofURC indication until ring indicatorpulse ends.
 
The commandcan delay the output ofURC indication until ring indicatorpulse ends.
  
−
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=56 '''4.3.18. AT+QCFG="urc/cache"URC Cache Function - page 55''']
+
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=57&zoom=100,68,366 AT+QCFG="urc/cache"URC Cache Function]===
−
 
+
----
−
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=57 '''4.3.19. AT+QCFG="tone/incoming"Ring tone Function - page 56''']
+
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=58&zoom=100,68,709 AT+QCFG="tone/incoming"Ring tone Function]===
−
 
+
----
−
[https://wiki.teltonika-networks.com/wikibase/images/2/2e/Quectel_EC25EC21_AT_Commands_Manual_V1.2.pdf#page=58 '''4.4. AT+QINDCFG   URC Indication Configuration - page 57''']
+
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=59&zoom=100,68,708 AT+QINDCFG URC Indication Configuration]===
−
 
+
----
 
The command is used to control URC indication.
 
The command is used to control URC indication.
  
−
[[Category:TRM250 AT Commands]]
+
[[Category:TRM240 AT Commands]]

Latest revision as of 10:00, 2 March 2023

TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > TRM240 AT Commands > Status Control Commands

Status Control Commands

AT+CPAS Mobile Equipment Activity Status

TheExecutionCommand queries the module‟s activity status.

AT+CEER Extended Error Report

The commandis used to query an extended error and report the cause of the last failed operation, such as:

  • the failure to release a call;
  • the failure to set up a call (both mobile originated or terminated);
  • the failure to modify a call by using supplementary services;
  • the failure to activate, register, query, deactivate or deregister a supplementary service;
  • the failureto attach GPRS or the failureto activatea PDP context;
  • the failureto detach GPRS or the failureto deactivate a PDP context.

The release cause <text> is a text to describe the cause information given by the network.

AT+QCFG Extended Configuration Settings

The command is used to query and configure various settings of UE.

AT+QCFG="gprsattach" GPRS Attach Mode Configuration

The command specifies the mode to attach GPRS when UE is powered on. This configuration is valid only after the module is restarted.

AT+QCFG="nwscanmode" Network Search Mode Configuration

The commands pecifies the network mode to be serached. If <effect> is omitted, the configuration will take effect immediately.

AT+QCFG="nwscanseq" Network Searching Sequence Configuration

The command specifies the sequence of searching network. This configuration is valid only after the module is restarted.

AT+QCFG="roamservice" Roam Service Configuration

The command is used to enable or disable the roam service. If <effect> is omitted, the configuration will take effect immediately.

AT+QCFG="servicedomain" Service Domain Configuration

The command specifies the registered service domain. If <effect> is omitted, the configuration will take effect immediately.

AT+QCFG="band" Band Configuration

The command specifies the preferred frequency bands to be searched of UE. If <effect> is omitted, the configuration will take effect immediately.

AT+QCFG="hsdpacat" HSDPA Category Configuration

The command specifies the HSDPA category. This configuration is valid only after the module is restarted.

AT+QCFG="hsupacat" HSUPA Category Configuration

The command specifies the HSUPA category. This configuration is valid only after the module is restarted.

AT+QCFG="rrc" RRC Release Version Configuration

The command specifies the RRC release version. This configuration is valid only after the module is restarted.

AT+QCFG="sgsn" UE SGSN Release Version Configuration

The command specifies the UE SGSN release version. This configuration is valid only after the module is restarted.

AT+QCFG="msc" UE MSC Release Version Configuration

The commandspecifies the UE MSCrelease version. This configuration is valid only after the module is restarted.

AT+QCFG="PDP/duplicatechk"Establish Multi PDNs with the Same APN

The command allows/refuses establishing multi PDNs with the same APN profile. The configuration will take effect immediately.

AT+QCFG="urc/ri/ring" RI Behavior When RING URC is Presented

AT+QCFG="urc/ri/ring", AT+QCFG="urc/ri/smsincoming" and AT+QCFG="urc/ri/other"control the RI (ring indicator) behavior when a URC is reported. These configurations will be stored into NV automatically. The ring indicator is active low. AT+QCFG="urc/ri/ring" specifies the RI behavior when URC RING is presented to indicate an incoming call.

The sum of parameter <activeduration> and <inactiveduration> determines the interval time of “RING” indications when a call is coming.

AT+QCFG="urc/ri/smsincoming" RIBehavior WhenIncoming SMSURCs are Presented

The command specifies the RI (ring indicator) behavior when related incoming message URCs are presented. Related incoming message URCs list: +CMTI,+CMT,+CDS and +CBM.

AT+QCFG="urc/ri/other" RI Behavior When Other URCsare Presented

The command specifies the RI (ring indicator)behavior when other URCs are presented.

AT+QCFG="risignaltype" RISignal Output Carrier

The command specifies the RI (ring indicator) signal output carrier.

AT+QCFG="urc/delay"Delay URC Indication

The commandcan delay the output ofURC indication until ring indicatorpulse ends.

AT+QCFG="urc/cache"URC Cache Function

AT+QCFG="tone/incoming"Ring tone Function

AT+QINDCFG URC Indication Configuration

The command is used to control URC indication.

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Status_Control_Commands&oldid=103909"