View source for Status Control Commands TRM240

== Status  Control  Commands ==

===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=39&zoom=100,68,232 AT+CPAS Mobile Equipment Activity Status]===
----
TheExecutionCommand queries the module‟s activity status.

===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=40&zoom=100,68,470 AT+CEER Extended Error Report]===
----
The commandis used to query an extended error and report the cause of the last failed operation, such as:
* the failure to release a call;
* the failure to set up a call (both mobile originated or terminated);
* the failure to modify a call by using supplementary services;
* the failure to activate, register, query, deactivate or deregister a supplementary service;
* the failureto attach GPRS or the failureto activatea PDP context;
* the failureto detach GPRS or the failureto deactivate a PDP context.

The release cause '''<text>''' is a text to describe the cause information given by the network.

===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=41&zoom=100,68,346 AT+QCFG Extended Configuration Settings]===
----
The command is used to query and configure various settings of UE.

===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=42&zoom=100,68,684 AT+QCFG="gprsattach" GPRS Attach Mode Configuration]===
----
The  command specifies  the  mode  to  attach GPRS when  UE  is  powered  on.  This  configuration  is  valid only after the module is restarted.

===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=43&zoom=100,68,370 AT+QCFG="nwscanmode" Network Search Mode Configuration]===
----
The  commands pecifies  the network  mode  to  be  serached.  If '''<effect>''' is  omitted,  the  configuration  will take effect immediately.

===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=44&zoom=100,68,285 AT+QCFG="nwscanseq" Network Searching Sequence Configuration]===
----
The  command specifies  the  sequence  of  searching  network. This  configuration  is  valid  only  after  the module is restarted.

===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=45&zoom=100,68,97 AT+QCFG="roamservice" Roam Service Configuration]===
----
The command is used to enable or disable the roam service. If '''<effect>''' is omitted, the configuration will take effect immediately.

===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=45&zoom=100,68,808 AT+QCFG="servicedomain" Service Domain Configuration]===
----
The command specifies the registered service domain. If '''<effect>''' is omitted, the configuration will take effect immediately.

===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=46&zoom=100,68,598 AT+QCFG="band" Band Configuration]===
----
The command specifies the preferred frequency bands to be searched of UE. If '''<effect>''' is omitted, the configuration will take effect immediately.

===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=48&zoom=100,68,156 AT+QCFG="hsdpacat" HSDPA Category Configuration]===
----
The command specifies the HSDPA category. This configuration is valid only after the module is restarted.

===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=48&zoom=100,68,834 AT+QCFG="hsupacat" HSUPA Category Configuration]===
----
The command specifies the HSUPA category. This configuration is valid only after the module is restarted.

===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=49&zoom=100,68,474 AT+QCFG="rrc" RRC Release Version Configuration]===
----
The  command specifies  the  RRC  release  version.  This  configuration  is  valid  only  after  the  module  is restarted.

===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=50&zoom=100,68,202 AT+QCFG="sgsn" UE SGSN Release Version Configuration]===
----
The command specifies the UE SGSN release version. This configuration is valid only after the module is restarted.

===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=50&zoom=100,68,817 AT+QCFG="msc" UE MSC Release Version Configuration]===
----
The commandspecifies the UE MSCrelease version. This configuration is valid only after the module is restarted.

===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=51&zoom=100,68,496 AT+QCFG="PDP/duplicatechk"Establish Multi PDNs with the Same APN]===
----
The command allows/refuses establishing multi PDNs with the same APN profile. The configuration will take effect immediately.

===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=52&zoom=100,68,201 AT+QCFG="urc/ri/ring" RI Behavior When RING URC is Presented]===
----
'''AT+QCFG="urc/ri/ring"''', '''AT+QCFG="urc/ri/smsincoming"''' and '''AT+QCFG="urc/ri/other"control''' the RI  (ring  indicator)  behavior  when  a  URC  is  reported.  These  configurations  will  be  stored  into  NV automatically.  The  ring  indicator  is  active  low. '''AT+QCFG="urc/ri/ring"''' specifies  the  RI  behavior  when URC '''RING''' is presented to indicate an incoming call.

The sum of parameter '''<activeduration>''' and '''<inactiveduration>''' determines the interval time of “RING”
indications when a call is coming.

===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=54&zoom=100,68,97 AT+QCFG="urc/ri/smsincoming" RIBehavior WhenIncoming SMSURCs are Presented]===
----
The  command specifies the RI  (ring  indicator) behavior  when  related  incoming  message  URCs  are presented. Related incoming message URCs list: '''+CMTI''','''+CMT''','''+CDS''' and '''+CBM'''.

===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=55&zoom=100,68,97 AT+QCFG="urc/ri/other" RI Behavior When Other URCsare Presented]===
----
The command specifies the RI (ring indicator)behavior when other URCs are presented.

===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=55&zoom=100,68,810 AT+QCFG="risignaltype" RISignal Output Carrier]===
----
The command specifies the RI (ring indicator) signal output carrier.

===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=56&zoom=100,68,640 AT+QCFG="urc/delay"Delay URC Indication]===
----
The commandcan delay the output ofURC indication until ring indicatorpulse ends.

===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=57&zoom=100,68,366 AT+QCFG="urc/cache"URC Cache Function]===
----
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=58&zoom=100,68,709 AT+QCFG="tone/incoming"Ring tone Function]===
----
===[https://wiki.teltonika-networks.com/images/3/32/Quectel_EC25%26EC21_AT_Commands_Manual_V1.3.pdf#page=59&zoom=100,68,708 AT+QINDCFG URC Indication Configuration]===
----
The command is used to control URC indication.

[[Category:TRM240 AT Commands]]