Difference between revisions of "Stunnel configuration example using Telnet"
From Teltonika Networks Wiki
(Created page with " ==Introduction== ==Configuration Overview and Prerequisites== ==Router Configuration== ==Stunnel Configuration== ==Testing Results==") |
|||
| Line 1: | Line 1: | ||
==Introduction== | ==Introduction== | ||
| + | This article provides a guide on how to configure stunnel and use telnet protocol for devices to interact with each other securely. These configurations can be implemented on RUT9xx and RUTX series. | ||
| + | |||
| + | * First you want to make sure that you have '''ADVANCED mode''' enabled. This will allow you to choose from a larger variety of settings. | ||
| + | ( add image) | ||
| + | Stunnel is an open-source proxy service that adds TLS encryption to clients and Servers already existing on a VPN network. TLS encryption provided by Stunnel can be used as an additional layer of encryption for data sent by OpenVPN. This procedure increases the security of the established connection and provides higher chances of passing a Deep packet inspection (DPI) check. | ||
Revision as of 02:42, 16 November 2022
Introduction
This article provides a guide on how to configure stunnel and use telnet protocol for devices to interact with each other securely. These configurations can be implemented on RUT9xx and RUTX series.
- First you want to make sure that you have ADVANCED mode enabled. This will allow you to choose from a larger variety of settings.
( add image) Stunnel is an open-source proxy service that adds TLS encryption to clients and Servers already existing on a VPN network. TLS encryption provided by Stunnel can be used as an additional layer of encryption for data sent by OpenVPN. This procedure increases the security of the established connection and provides higher chances of passing a Deep packet inspection (DPI) check.
