Teltonika Networks Wiki

TAP100 LEDs

Revision as of 10:00, 7 March 2023 by Vainius.l (talk | contribs) (Created page with "{{Template: Networking_rutos_manual_leds <!------------------------DEVICE-----------------------> | name = TAP100 | series = TAP <!----------------------SEPARATORS...")

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)
Main Page > TAP Access Points > TAP100 > TAP100 Manual > TAP100 LEDs

This page contains information the different types of LEDs and their behaviour on a TAP100 device.

Power LED

The power LED is located on the bottom left corner of the front panel, just under the power connector.

Networking tap100 manual leds power led.png

It indicates whether the device is powered on or not.

State Description
LED turned on Device is powered on.
LED turned off Device is not powered on.

WAN type LEDs

The WAN type LEDs are located at the top-right of the front panel.

500px

They indicate which type of Internet connection is currently active.

State Description
SIM1 LED on A mobile data connection on SIM1 is active.
SIM1 LED off A mobile data connection on SIM1 is inactive.
SIM2 LED on A mobile data connection on SIM2 is active.
SIM2 LED off A mobile data connection on SIM2 is inactive.
ETH LED on An Ethernet data connection (wired WAN) is active.
ETH LED off An Ethernet data connection (wired WAN) is inactive.
Retrieved from "https://wiki.teltonika-networks.com/index.php?title=TAP100_LEDs&oldid=104165"