TRB143 Hotspot

Main Page > TRB Gateways > TRB143 > TRB143 Manual > TRB143 WebUI > TRB143 Services section > TRB143 Hotspot

The information in this page is updated in accordance with firmware version TRB1_R_00.07.07.1.


Summary

On Teltonika Networks devices a Hotspot is a service that provides authentication, authorization and accounting for a network. This chapter is an overview of the Hotspot section for TRB143 devices.

Note: Hotspot is additional software that can be installed from the System → Package Manager page.

General

Hotspot Instances


The Hotspot Instances section displays the main parameters of your Hotspot. By default, a Hotspot instance does not exist on the device. To create a new instance and begin configuration:

  1. select an 'Interface';
  2. click the 'Add' button;

Networking rutos manual hotspot hotspot instances add button edit buton wifi.png

After this, a new Hotspot configuration window will appear.

General Settings


The General Settings window is where most of the Hotspot configuration takes place. Look to the sub-sections below for information on configuration fields found in the General Settings sections.

General

Networking rutos manual hotspot general hotspot instances general settings general trb v1.png

Field Value Description
Configuration profile Cloud4wi | Default | Hotspotsystems | Purple portal; default: Default Pre-configures Hotspot settings according to the selected service provider.
Enable off | on; default: on Turns the Hotspot instance on or off.
Hotspot Network ip/netmask; default: 192.168.3.0/24 IP address and subnet of the Hotspot network.
IP Address ip; default: 192.168.3.254 Defines the IP address of your Hotspot router in network.
Authentication mode Local users | Radius | MAC authentication | Single sign-on| SMS OTP; default: Local users Authentication mode defines how users will connect to the Hotspot.
Local users: Allow signup off | on; default: off Allows users to sign up to hotspot via landing page.
Local users: Expiration time integer; default: 0 User credential expiration time. Applies to users who signed up via landing page.
Local users: Users group user group; default: default The user group to which users signed up via landing page should be assigned to.
Radius: Enable MAC authentication off | on; default: off Enable MAC address authentication.
MAC authentication: Require password off | on; default: off Enables password requirement for MAC authentication.
MAC authentication: MAC auth password string; default: none Password for MAC authentication.
MAC authentication / Single sign-on/ SMS OTP: User group select; default: default Specifies the group of dynamically created users.
SMS OTP: Allow password duplicates off | on; default: off Allows more than one user to login with a same password.
SMS OTP: Expiration time unsingned integer; default: 0 User expiration time in sec (0 means unlimited).
Landing Page Internal | External; default: Internal Location of the landing page.
UAM Port integer; default: 3990 Port to bind for authenticating clients.
Password encoding off | on; default: none Password encoding with the challenge.
Landing page address url; default: none External landing page address (http://www.example.com).
UAM Secret string; default: none Shared secret between uamserver and hotspot.
Success page Success Page | Original URL | Custom; default: Success page Location to return to after successful authentication.
Custom url; default: none Address must contain protocol (http://www.example.com).
Advanced

Networking rutos manual hotspot general hotspot instances general settings advanced v1.png

Field Value Description
Additional interfaces Available interfaces; default: none Choose additional the interfaces you want to attach to this hotspot instance.
Enable MAC blocking off | on; default: off Blocks access to MAC addresses that have reached set amount of failed login attempts.
Logout address ip; default: 1.0.0.0 IP address to instantly logout a client accessing it.
Protocol HTTP | HTTPS; default: HTTP Protocol to be used for landing page.
Enable TOS off | on; default: off Enables Terms of Service (ToS) requirement. Client device will be able to access the Internet only after agreeing ToS.
Trial access off | on; default: off Enables trial internet access for a specific group.
Group User group; default: default Specifies the group of trial users.
Subdomain string; default: none Combined with Domain to make a DNS alias for the Hotspot IP address.
Domain string; default: none Combined with Subdomain to make a DNS alias for the Hotspot IP address.
HTTPS to landing page redirect off | on; default: off Redirect initial pre-landing page HTTPS requests to hotspot landing page.
Certificate files from device off | on; default: off Specified whether to upload key & certificate files from computer or to use files generated on this device via the System → Administration → Certificates page.
SSL key file key file; default: none Upload/select SSL key.
SSL certificate file certificate file; default: none Upload/select SSL certificate.
Primary DNS server ip; default: 8.8.8.8 Additional DNS servers that are to be used by the Hotspot.
Secondary DNS server ip; default: 8.8.4.4 Additional DNS servers that are to be used by the Hotspot.
Radius

Radius authentication mode uses an external RADIUS server, to which you have to provide an address to, instead of using the router's Local Authentication. If you are using Local authentication, this section is not visible.

Networking rutos manual hotspot general hotspot instances general settings radius v1.png

Field Value Description
RADIUS server #1 ip; default: none The IP address of the RADIUS server #1 that is to be used for Authenticating your wireless clients.
RADIUS server #2 ip; default: none The IP address of the RADIUS server #2 that is to be used for Authenticating your wireless clients.
Authentication port integer [0..65535]; default: 1812 RADIUS server authentication port.
Accounting port integer [0..65535]; default: 1813 RADIUS server accounting port.
NAS identifier string; default: none NAS-Identifier is one of the basic RADIUS attributes.
Radius secret key string; default: none The secret key is a password used for authentication with the RADIUS server.
Swap octets off | on; default: off Swaps the meaning of input octets and output as it relates to RADIUS attributes.
Location name string; default: none Custom location name for your Hotspot.
Location ID string; default: none Custom location ID for your Hotspot.
Walled Garden

You can add a list of addresses that users connected to the Hotspot will be able to reach without any authentication. By default this list is empty. Simply write addresses into the Address List.

Format of address is website.com (does not include https://www).

Networking rutos manual hotspot general hotspot instances general settings walled garden v1.png

Field Value Description
Address list domain names (one record per line); default: none List of addresses the client can access without first authenticating. One record per line. See placeholder for accepted formats.
URL Parameters

The URL parameters section becomes visible when Landing page is selected as External in General settings section.

Networking rutos manual hotspot general hotspot instances general settings urlparams v1.png

Field Value Description
UAM IP string; default: none The IP Address of the Captive Portal gateway.
UAM port string; default: none The port on which the Captive Portal will serve web content.
Called string; default: none The MAC address of the IP Address of the Captive Portal gateway.
MAC string; default: none The MAC address of the client trying to gain Internet access.
IP ip default: none The IP Address of the client trying to gain Internet access.
NAS id string; default: none An identification for the Captive Portal used in the RADIUS request.
Session id string; default: none The unique identifer for session.
User url string; default: none The URL which the user tried to access before he were redirected to the Captive Portal's URL's pages.
Challenge string; default: none A challenge that should be used together with the user's password to create an encrypted phrase used to log on.
Custom 1 string; default: none Add custom name and custom value which will be displayed in url parameters.
- SSID | Hostname | FW version | --Custom--; default: SSID -
Custom 2 string; default: none Add custom name and custom value which will be displayed in url parameters.
- SSID | Hostname | FW version | --Custom--; default: SSID -
User Scripts

In this section you can add custom Scripts that will be executed after a session is authorized in the Session up section, after session has moved from authorized state to unauthorized in the Session down section and after a new user has been signed up in the User signup section.

Networking rutos manual hotspot general hotspot instances general settings user scripts v2.png

Field Value Description
Session up bash script; default: none Script executed after a session is authorized. Executed with the environment variables (Please refer to the wiki).
Session down bash script; default: none Script executed after a session has moved from authorized state to unauthorized. Executed with the environment variables (Please refer to the wiki).
User signup bash script; default: none Script executed after a new user has been created during signup process. Executed with the environment variables (Please refer to the wiki).

Local Users

The Local Users section is used to create and manage users that can connect to the Hotspot. The elements comprising the Local Users page are explained in the list and figure below.

  1. Entering a Username, Password and clicking the 'Add' button creates a new user.
  2. The 'Group' dropdown menu assigns a user to another group.
  3. The 'Edit' button lets you change a user's password or assign the user to another group.
  4. The 'Delete[X]' button deletes a user.

Networking rutos manual hotspot local users add button edit button v1.png

Landing Page

This section is used to define how your Hotspot's Landing Page will look like to connecting users.

General Settings


General Settings section lets you choose the authentication protocol and theme that will be used in the Landing Page. You can download more themes using the Package Manager

Networking rutos manual hotspot landing page general settings v1.png

Themes


The Themes section displays all available Landing Page themes. In order to download a theme, click the 'Download' button, in order to edit a theme, click the 'Edit' button next to it.

Networking rutos manual hotspot landing page themes download edit button v1.png

Images


The Images section allows you to upload custom images to different objects.

Networking rutos manual hotspot landing page themes images v2.png

Style Settings


Pressing 'Edit' button next to style settings lets you edit how your landing page will look visually using CSS syntax.

Networking rutos manual hotspot landing page themes style settings v1.png

View Settings


In View Settings you can access and modify default templates for various parts of landing page and edit their HTML code.

Networking rutos manual hotspot landing page themes view settings v1.png

Custom Theme


To use custom theme you can download default theme and edit it's content. Then use 'Browse' button to upload it.

Networking rutos manual hotspot landing page themes upload custom v2.png

User Groups

User Groups provides the possibility to set different connection limits for different users. A group called 'default' is already created and does not have any limitations set by default. You can

  1. create a new group by entering a custom Name and clicking 'Add'
  2. or configure the existing rule by clicking the 'Edit' button next to it.

Networking rutos manual hotspot user groups edit button v1.png

A group's settings page will look similar to this:

Networking rutos manual hotspot user groups group default settings v3.png

Field Value Description
Idle timeout integer; default: none A timeout in seconds after which idle users are automatically disconnected from the Hotspot. (0 means unlimited.)
Time limit integer; default: none Disables hotspot user after time limit in sec is reached. (0, meaning unlimited)
Download bandwidth integer; default: none Maximum download bandwidth that the users assigned to this template can achieve. Bandwidth can be specified in Mbit/s.
Upload bandwidth integer; default: none Maximum upload bandwidth that the users assigned to this template can achieve. Bandwidth can be specified in Mbit/s.
Download limit integer; default: none A received data limit that the users assigned to this template can reach. After the data limit is reached, the user will lose data connection. Download limit is specified in MB.
Upload limit integer; default: none A sent data limit that the users assigned to this template can reach. After the data limit is reached, the user will lose data connection. Upload limit is specified in MB.
Warning integer; default: none Send an SMS warning to hotspot user after warning value of download or upload data in MB is reached. Only works with SMS OTP authentication.
Period Month | Week | Day; default: Month The beginning of the period during which the restriction specified in this section will apply. After the period is over, all specified limits are reset.
Start day integer [1..31] | Monday..Sunday | integer [1..24]; default: 1 Choices changes depending on what 'Period' was chosen. Specifies which day of the month, week or hour of the day the limits will be reset.

User Management

The User sessions tab displays the status and session statistics of currently logged in users. You can also "kick" (deauthenticate) a user by clicking the 'Logout' button next to it.

Networking rutos manual hotspot user management current hotspot users v1.png


The Registered Hotspot Users tab displays the data of unique users that have registered to the hotspot before.

Networking rutos manual hotspot user management registered hotspot users v1.png