Difference between revisions of "TSW010 Powering Options"
From Teltonika Networks Wiki
Gytispieze (talk | contribs) |
Gytispieze (talk | contribs) |
||
(One intermediate revision by the same user not shown) | |||
Line 3: | Line 3: | ||
| series = TSW0 | | series = TSW0 | ||
| poe = 0 | | poe = 0 | ||
+ | | passive_poe = 1 | ||
+ | | file_lan1 = Networking_tsw114_manual_powering_options_lan1.png | ||
+ | | size_lan1 = 400 | ||
}} | }} |
Latest revision as of 11:22, 21 February 2023
Main Page > TSW Switches > TSW010 > TSW010 Manual > TSW010 Powering OptionsThis chapter contains information on powering options supported by TSW010 switch.
The switch has a 2 pin power socket and can be powered by a 7-30 VDC power supply unit (PSU). Refer to the image below for the power socket's pinout information:
Power socket
2 pin power socket
No. | Description | Wire color | |
---|---|---|---|
1 | Power | Red | |
2 | Ground | Black | |
Passive PoE
The device may also be powered by an Ethernet cable via the LAN1 port:
(Do not use in other ports!)
- The device is NOT COMPLIANT with the IEEE 802.3af-2003 standard: powering the device from an IEEE 802.3af-2003 power supply will damage the device as it is not rated for input voltages of the PoE standard.
- The device is NOT COMPLIANT with the IEEE 802.3at standard: it cannot power other devices over Ethernet.