TSW200 First Start
This Wiki page contains the online version of the Quick Start Guide (QSG) for the TSW200 Switch. Here you will find an overview of the various components found on the front and back sides of a TSW200 switch, basic hardware installation, device specifications and general safety information. It is highly recommended that you acquaint yourself with with the Quick Start Guide before using the device. If you own a TSW200 switch, you can also find a printed version of the Quick Start Guide in the device's package.
|1||2 pin power socket|
|4||PoE powered Ethernet ports|
2 pin power socket
|1||Orange LED lit||10/100 Mbps link established|
|2||Orange LED blinking||Active link connection|
|3||Green LED lit||1000 Mbps link established|
|1||Down LED lit||Lower port link established|
|2||Down LED blinking||Lower port active traffic|
|3||Up LED lit||Upper port link established|
|4||Up LED blinking||Upper port active traffic|
TSW200 switch must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.
|Input voltage range*||7 - 57 V|
|Max power consumption||5.5 W|
|Max PoE power budget at PSE||240 W|
|Max Ethernet cable length||100 m|
* PoE operates properly only when connected power supply outputs 44 V or higher voltage.
This sign on the package means that is necessary to read the User's Manual before you start using the device
This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste