TSW212 LLDP
Main Page > TSW Switches > TSW212 > TSW212 Manual > TSW212 WebUI > TSW212 Services section > TSW212 LLDP
The information in this page is updated in accordance with firmware version .
Summary
The LLDP (Link Layer Discovery Protocol) is a vendor-neutral link layer protocol used by network devices for advertising their identity, capabilities, and neighbors on a local area network based on IEEE 802 technology, principally wired Ethernet.
LLDP Configuration
The LLDP Configuration section is used to choose the ports you want to send LLDP frames to. This helps in discovering and monitoring network devices connected to those specific ports.
Field | Value | Description |
---|---|---|
Enable | off | on; default: off | Enables LLDP service. Note: SNMP will be enabled when enabling LLDP. |
Interval | integer [1..65535]; default: 5 | The LLDP interval represents the frequency of network device updates and is measured in seconds. |
Mark selected ports (0) as | -(interactive) buttons -Enable | Disable | Choose the ports you want to send LLDP frames to. |
LLDP Neighbors
The LLDP Neighbors section displays current LLDP neighbors.
Field Name | Description |
---|---|
Port name | Name of physical port. |
Station name | Neighbors station name. |
Chassis ID | Identifier of the chassis. |
IP address | Neighbors device IP. |
Port description | Neighbors port description |