TSW304 First Start

From Teltonika Networks Wiki
Main Page > TSW Switches > TSW304 > TSW304 First Start

This Wiki page contains the online version of the Quick Start Guide (QSG) for the TSW304 Switch. Here you will find an overview of the various components found on the front and back sides of a TSW304 switch, basic hardware installation, device specifications and general safety information. It is highly recommended that you acquaint yourself with with the Quick Start Guide before using the device. If you own a TSW304 switch, you can also find a printed version of the Quick Start Guide in the device's package.

TSW304 Front panel Top.png

Front view

No. Description
Networking tsw304 manual panels front.png
1 Grounding screw
2 2 pin power socket
3 Power LED
4 ETH LEDs
5 Ethernet ports

Back view

Networking tsw304 manual panels back.png

Connectors

2 pin power socket

The power socket is bipolar.
TSW304 power socket pinout.png

Ethernet port

No. Action Describtion
Networking tsw100 manual ethernet port LED v2.png
1 Orange LED lit 10/100 Mbps link established
1 Orange LED blinking Active link connection
2 Green LED lit 1000 Mbps link established



Safety information

TSW304 switch must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.

Technical specifications
Input voltage range 7 - 57 V
Max power consumption <5 W
Max Ethernet cable length 100 m


日本国内専用です

本製品を電気通信事業者(移動体通信事業者、固定通信事業者、インターネットプロバイダなど)の電気通信回線(または公衆無線LAN)に直接接続することはできません。電気通信事業者の公衆電気通信回線設備に接続する場合は、必ず日本の「電気通信事業法」で認められた機器(ルーター、ゲートウェイ、モデムなど)を介して接続してください。


Qsg rut950 manual.PNGThis sign on the package means that is necessary to read the User's Manual before you start using the device

Qsg rut950 recycle.PNGThis sign on the package means that all used electronic and electric equipment should not be mixed with general household waste