31,703
edits
Changes
no edit summary
<b>Telenor</b> is a Managed IoT Cloud (MIC) - a secure cloud platform for device and data management that generates valuable and useful insights about your connected products. It provides the building blocks you need to connect your product, collect and store all product data, and extract value and insights from that data.
==Introduction==
==Introduction==
You will need:
You will need:
* A router from RUT9xx series
* A router from the RUT9xx series
* A Telenor account
* A Telenor account
</ul>
</ul>
==Monitoring router parameters==
==Creating rules==
For this example, we'll create a rule that turns the router's relay output ON when the signal strength fall below -70 dBm.
----
<ul>
<li>Login to the router's WebUI and go to the <b>Services → Telenor MQTT</b> page. Check the <b>Receive messages</b> field and come up with a custom <b>Setting Value</b>:<br>[[File:Telenor 12.png]]</li>
----
<li>Login to your Telenor account. Click the <b>Settings</b> button located on the top-right side of the screen, next to your account name. Select the <b>Rules</b> box in the menu on the left and click <b>+ New Rule</b>:<br>[[File:Telenor 7.png]]</li>
----
<li>Name and describe your rule, select your Domain and the Thing Type to which the rule will be assigned. Click Next to continue:<br>[[File:Telenor 8.png]]</li>
----
<li>The <b>When</b>, <b>And</b> and <b>Then</b> sections indicate the conditions under which a certain specified action will occur. When you have set these conditions, Click Next to continue:<br>[[File:Telenor 9.png]]</li>
----
<li>Add a <b>New Action</b>. Specify it to <b>Set resource</b> and enter the setting and its value to change (for our example this will be <b>relay</b> set to <b>1</b>). Click Add to create the rule:<br>[[File:Telenor 10.png]]</li>
----
<li>The rule will appear in the Rules table. Make sure it is turned ON ([[File:Telenor switch.png|20px]]):<br>[[File:Telenor 11.png]]</li>
</ul>
[[Category:IoT]]