505
edits
Changes
Teltonika EYE device pairing and data sender configuration example (view source)
Revision as of 16:54, 25 January 2023
, 16:54, 25 January 2023→Connecting Bluetooth sensors to the device
Follow these steps to pair either EYE sensor or EYE beacon to the device.
Follow these steps to pair either EYE sensor or EYE beacon to the device.
Navigate to '''Services -> Bluetooth''':
# Press on the toggle to '''Enable Bluetooth''' (1)
# Press '''Scan''' (2)
[[File:Bluetootheyesensorconfiguration enablebluetoothscan v1.png|border|600px|class=tlt-border]]
[[File:Bluetootheyesensorconfiguration enablebluetoothscan v1.png|border|600px|class=tlt-border]]
Once the Scan is finished, you should be able to see a list with all Bluetooth devices around. You can identify your EYE device by looking at the MAC address on top of it. To Pair an EYE device to our RUTX11, simply select it (1) and press Pair (2).
Once the Scan is finished, you should be able to see a list with all Bluetooth devices around. You can identify your EYE device by looking at the MAC address on top of it. To Pair an EYE device to our RUTX11, simply select it '''(1)''' and press Pair '''(2)'''.
[[File:Bluetootheyesensorconfiguration scanlist v1.png|border|1000px|class=tlt-border]]
[[File:Bluetootheyesensorconfiguration scanlist v1.png|border|1000px|class=tlt-border]]