Changes

This article provides an extensive configuration example with details on how to create a tunnel connection between two IPsec instances, one of which is configured on RUTxxx router and the other one on Cisco device.

This article provides an extensive configuration example with details on how to create a tunnel connection between two IPsec instances, one of which is configured on RUTxxx router and the other one on Cisco device.

==Prerequisites==

==Prerequisites==

# Select '''Group: Group''' (5).

# Select '''Group: Group''' (5).

When you are do with '''IPsec Profiles''', save settings, go to '''Site-to-Site''' settings and apply the following configuration:

When you are done with '''IPsec Profiles''', save settings, go to '''Site-to-Site''' settings and apply the following configuration:

[[File:Networking_rutxxx_configuration_example_ipsec_cisco_s2s_v2.png|border|class=tlt-border]]

[[File:Networking_rutxxx_configuration_example_ipsec_cisco_s2s_v2.png|border|class=tlt-border]]

If the ping requests are successful, congratulations, your setup works! If not, we suggest that you review all steps once more.

If the ping requests are successful, congratulations, your setup works! If not, we suggest that you review all steps once more.